MID-7604/7602 POWER DRIVE User Guide
This user guide describes the electrical and mechanical aspects of the MID-7604/7602 power drive and describes how to use the MID-7604/7602 with your motion controller. Edition Date: December-1999 URL: http://digital.ni.com/manuals.nsf/websearch/E5DE1685ACD8A29A86256839005DF0B1

DIN-Rail/Wall Mounting Kit Installation Guide
The DIN-rail/wall mounting kit allows you to mount a variety of National Instruments accessories to a DIN rail, wall, or any flat surface. This installation guide lists the contents of your kit and contains instructions for installing the DIN-rail mounting brackets and wall mounting brackets. Edition Date: November-1999 URL: http://digital.ni.com/manuals.nsf/websearch/7D0099AD69AA783B8625680B006F7126

MID-7604/7602 Accessory
Note: This document is not the most recent edition. Search to find out if a more recent edition is available. Edition Date: September-1999 URL: http://digital.ni.com/manuals.nsf/websearch/F5341B9CC7C37C36862567EE0071DDDD

68M-50F Step/Servo Bulkhead Cable Adapter User Guide
Using the 68M-50F step/servo bulkhead cable adapter, you can connect a 68-pin motion controller to a 50-pin motion accessory, or you can connect a 50-pin ValueMotion controller to a 68-pin motion accessory. You set switches to configure the adapter for stepper or servo operation, as well as to set Edition Date: August-1999 URL: http://digital.ni.com/manuals.nsf/websearch/7C919C2F31850C82862567BD0068DA60

FlexMotion Software Reference Manual
The FlexMotion Software Reference Manual describes the FlexMotion software. The FlexMotion software is a powerful application programming interface (API) between your motion control application and the National Instruments FlexMotion controllers for ISA and PCI bus computers. Edition Date: August-1999 URL: http://digital.ni.com/manuals.nsf/websearch/92003B670CC3CB3F862567C800755B95

Universal Motion Interface (UMI) Accessory User Guide and Specifications
This user guide describes how to use the UMI-7764, UMI-4A, UMI-Flex6, and UMI-Flex4 accessories. Edition Date: August-1999 URL: http://digital.ni.com/manuals.nsf/websearch/AC6FAA69218C9624862567BD0061DDAC

7344 Hardware User Manual
This manual describes the electrical and mechanical aspects of each controller in the 7344 family and contains information concerning their operation and programming. Unless otherwise noted, text applies to all controllers in the 7344 family. The 7344 family of controllers includes the following Edition Date: July-1999 URL: http://digital.ni.com/manuals.nsf/websearch/23ECE139F7688A4C862567BC004FD331

FlexMotion Software Release Notes
FlexMotion Software 4.5 is the motion control software for interfacing with all National Instruments FlexMotion series motion controllers. These release notes discuss compatibility issues, describe how to install your FlexMotion software and hardware, and summarize changes and improvements Edition Date: July-1999 URL: http://digital.ni.com/manuals.nsf/websearch/6CEA8D58EC2CAE46862567C800556D01

FlexMotion-6C Hardware User Manual
This manual describes the electrical and mechanical aspects of each controller in the FlexMotion-6C family of motion controllers and contains information concerning their operation and programming. Unless otherwise noted, text applies to all controllers in the FlexMotion-6C family. The Edition Date: July-1999 URL: http://digital.ni.com/manuals.nsf/websearch/FD247C8F7862D958862567BC004E7221

Motion Control 7324/7314 Hardware User Manual
This manual describes the electrical and mechanical aspects of each controller in the ValueMotion 7324/7314 family of controllers and contains information concerning their operation and programming. Unless otherwise noted, text applies to all controllers in the ValueMotion 7324/7314 family. The Edition Date: July-1999 URL: http://digital.ni.com/manuals.nsf/websearch/8CADD14F2104C4F0862567B60053DC9F