Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI
Manuals

Category(s) Selected [start over]

Edition
: 1998 [remove] ,
Product
: Data Acquisition [remove] ,
1-10 de 39
Manuals [see results below]. To refine your results, select another category.
Product
Multifunction DAQ (29)
Counter/Timers (10)
Digital I/O (15)
High-Precision DAQ (5)
Portable DAQ (2)
Document Type
User Manual (19)
Getting Started (1)
Installation Guide (6)
Release Notes (3)
Other (10)

Sort by:
1-10 de 39

DAQPad-6507/6508 User Manual
This manual describes the mechanical and electrical aspects of the DAQPad-6507 and DAQPad-6508 and contains information concerning their operation and programming. Edition Date: December-1998 URL: http://digital.ni.com/manuals.nsf/websearch/7F57505D3D05B41B862566FA0076B292

NI 4350/4351 User Manual
This manual describes the electrical and mechanical aspects of the NI 4350/4351 family of instruments and contains information concerning its operation and programming. Edition Date: December-1998 URL: http://digital.ni.com/manuals.nsf/websearch/CEBF176C01EBD1EB862566FA0076E9D3

NI-DAQ for PC Compatibles Release Notes
These notes contain information you must know before installing NI-DAQ for PC Compatibles, version 6.5. They explain how to install your NI-DAQ 6.5 driver software on Windows NT/98/95. They also contain instructions on how to install and use your electronic documentation set. Edition Date: December-1998 URL: http://digital.ni.com/manuals.nsf/websearch/3402C5D31CAD89DB862566F8007BC5A0

DAQCard E Series Register-Level Programmer Manual
This manual is intended for programming at the register level. Even if you are an experienced register-level programmer, consider using NI-DAQ or other National Instruments software to program your DAQCard E Series board. If NI-DAQ does not support your operating system or you have other reasons to Edition Date: November-1998 URL: http://digital.ni.com/manuals.nsf/websearch/D8771E9220C3EE12862566F800795A00

DAQCard E Series User Manual
This manual describes the electrical and mechanical aspects of each card in the DAQCard E Series product line and contains information concerning their operation and programming. Unless otherwise noted, text applies to all cards in the DAQCard E Series. The DAQCard E Series includes the following Edition Date: November-1998 URL: http://digital.ni.com/manuals.nsf/websearch/7CCC1CBB02FEBE94862567670050200C

Discontinuation of Revision C of the PCI-MIO-16E-4
You may have revision C of the PCI-MIO-16E-4; this revision will be discontinued after December 1, 1999 and will be replaced by revision E boards. Because National Instruments will accept orders only until December 1, 1999, you must place your order prior to this date if your application requires Edition Date: November-1998 URL: http://digital.ni.com/manuals.nsf/websearch/BE2CB8B509C641D1862566BF00502976

Note to Users: About Revision E of the PCI-MIO-16E-4
PCI-MIO-16E-4 revision E boards require NI-DAQ version 5.1 or greater for Windows 95/98/NT, or version 5.0.4 for Windows 3.1x. If you have an earlier version of NI-DAQ, you must upgrade your driver software. PCI-MIO-16E-4 revision E replaces revision C, which will be discontinued after December 1, Edition Date: November-1998 URL: http://digital.ni.com/manuals.nsf/websearch/FCACFB190389DD29862566BF0055C29D

Note to Users: Discontinuation of Original PC-DIO-24 and PC-DIO-96
You may have the original implementation of the National Instruments PC-DIO-24 or PC-DIO-96 board. The original board is built with through-hole manufacturing technology; new boards are built using surface-mount technology. The through-hole boards will be discontinued after December 31, 1999. Edition Date: November-1998 URL: http://digital.ni.com/manuals.nsf/websearch/F6A08A50E1DDD707862566F800798A92

Note to Users: Discontinuation of the AT-MIO-64F-5
The AT-MIO-64F-5 is being discontinued. You will not be able to order this product after March 15, 1999, and you must accept delivery of the order by March 31, 1999. No warranty repairs will be authorized after March 31, 2000. Edition Date: November-1998 URL: http://digital.ni.com/manuals.nsf/websearch/B25FD27955F5973F862566F80079B0E4

Note to Users: PCI-6031E(OEM1) Specification Deviation
The PCI-6031E(OEM1) is functionally equivalent to the PCI-6031E, but differs in the analog input FIFO buffer size. The correct analog input FIFO buffer specification for each device is: PCI-6031E(OEM1)......................... 1024 samples PCI-6031E ...................................... 512 samples Edition Date: November-1998 URL: http://digital.ni.com/manuals.nsf/websearch/97E4D66833DA14BD862566F80079D374

Sort by:
1-10 de 39