NI-IMAQ for Windows 95/NT Release Notes
NI-IMAQ for Windows 95/NT is the imaging acquisition software for all National Instruments IMAQ devices. The NI-IMAQ software is compatible with Windows 95 and Windows NT 4.0 or later. These release notes describe how to install your NI-IMAQ software. Also included is information about upgrading Edition Date: June-1998 URL: http://digital.ni.com/manuals.nsf/websearch/FCFC21C4F64AD00D8625665F005BD12F

Setup and Test the PCI-1424
This getting started card describes how to install your software and your PCI-1424, connect your camera, configure your software and hardware, select the camera file, and acquire an image. Edition Date: June-1998 URL: http://digital.ni.com/manuals.nsf/websearch/DCD8A326151136FB8625665F004ECE7B

Setup and Test the PCI/PXI-1408
Note: This document is not the most recent edition. Search to find out if a more recent edition is available. Edition Date: June-1998 URL: http://digital.ni.com/manuals.nsf/websearch/1EDBA7295E2EC6328625665F004E4F80

IMAQ D100100 Cable Installation Guide
This guide describes how to attach the IMAQ D100100 cable to your digital image acquisition (IMAQ) device and the SCB-100 100-pin shielded connector block. Edition Date: April-1998 URL: http://digital.ni.com/manuals.nsf/websearch/6D9A5DCD75DB8D038625665E005438C0

IMAQ 2504 Cable Installation Guide
This guide describes how to attach the IMAQ 2504 cable to your image acquisition (IMAQ) device. The IMAQ 2504 family of cables includes the A2504 and D2504 cables. You can use the IMAQ A2504 cable with IMAQ analog devices and the IMAQ D2504 with IMAQ digital devices. Edition Date: March-1998 URL: http://digital.ni.com/manuals.nsf/websearch/1A329EA0E11DE2B38625665E0053E298

IMAQ D100 Camera Cable Installation Guide
This guide describes how to attach the IMAQ D100 family of digital camera cables to your image acquisition (IMAQ) device. Edition Date: March-1998 URL: http://digital.ni.com/manuals.nsf/websearch/C13F8818F7828C7B8625665E00635A00