Note to Users: Updating Your Firmware and Software for Use with the FP-CTR-500 and FP-PWM-520
Note: This document is not the most recent edition. Search to find out if a more recent edition is available. Edition Date: December-1998 URL: http://digital.ni.com/manuals.nsf/websearch/FE89936BC3B2A62986256730005482AF

FieldPoint FP-1000/1001 User Manual
This manual describes how to install and use the FieldPoint FP-1000 and FP-1001 network modules. Edition Date: August-1998 URL: http://digital.ni.com/manuals.nsf/websearch/CEB111F44050C88F86256694004F95AB

FP-RLY-420 Operating Instructions
The FP-RLY-420 is a FieldPoint relay output module. It has eight normally open, nonlatching SPST relay output channels that can switch up to 3 A per channel, up to 35 VDC or 250 VAC. Hot plug and play operation, safety isolation, and on/off status indicators ensure that installation and maintenance Edition Date: July-1998 URL: http://digital.ni.com/manuals.nsf/websearch/6B58CBA11345E5608625665E00635932

FieldPoint Network Module Panel Mount Accessory
NI Home 4 ratings: 2.5 out of 5 Rate this Document FieldPoint Network Module Panel Mount Accessory Edition Date: April 1998 Part Number: 321938A-01 View PDF View the document in Adobe Acrobat PDF format. (File size: 99 KB) Right-click the link above and select Save Link/Target As to download the Edition Date: April-1998 URL: http://digital.ni.com/manuals.nsf/websearch/051671E36DAF60458625665E00635937

Note to Users: Updating Your Firmware and Software for Use with the FP-TC-120
To use the FP-TC-120 thermocouple module with a FieldPoint FP-1000 or FP-1001 network module, the network module must have a firmware revision of 14 or greater. Edition Date: March-1998 URL: http://digital.ni.com/manuals.nsf/websearch/24B47CA90FF7E1068625665E00635935