SCXI-1100 User Manual and Specifications
This manual describes the electrical and mechanical aspects of the SCXI-1100 module and contains information concerning its operation and programming. The SCXI-1100 operates as a 32-channel differential input multiplexer with an onboard software-programmable gain instrumentation amplifier (PGIA). Edition Date: October-1994 URL: http://digital.ni.com/manuals.nsf/websearch/0790D3C92CF4B16E8625665E00712865

VXIpc-486 Documentation Notice: AT-GPIB and Windows NT Compatibility
The built-in GPIB Talker/Listener/Controller port on your VXIpc-486 module is application compatible with the National Instruments AT-GPIB plug-in board, the industry-standard GPIB interface for ISA (PC AT) computers. Your VXIpc-486 port uses the same GPIB hardware circuitry as the AT-GPIB, Edition Date: October-1994 URL: http://digital.ni.com/manuals.nsf/websearch/9D61298FB80958C386256721005F0044

AT-AO-6/10 User Manual Expansion Board for the PC AT/EISA
This manual describes the mechanical and electrical aspects of the AT-AO-6/10 board and contains information concerning its operation and programming. The AT-AO-6/10 is a high-performance, analog output and digital I/O board for the IBM PC AT and compatibles and EISA personal computers (PCs). The Edition Date: September-1994 URL: http://digital.ni.com/manuals.nsf/websearch/D363A37AA8BEC3AA8625665E00656086

Dual Rack-Mount Kit Installation Guide
This guide describes how to install the rack-mount hardware for two GPIB-232CV, GPIB-422CV, GPIB-SCSI, GPIB-232CT, GPIB-422CT, GPIB-BUF, or GPIB-PRL controller/ converters. In addition to the rack-mount kit contents, you will also need a long-handled small Phillips-head screwdriver, a small Edition Date: September-1994 URL: http://digital.ni.com/manuals.nsf/websearch/A1E281F8E4D3D7B98625669F007126D4

Dual Rack-Mount Kit for GPIB-SCSI-A Installation Guide
This guide describes how to install the rack-mount hardware for two GPIB-SCSI-A controllers. In addition to the rack-mount kit contents, you will also need a long-handled small Phillips-head screwdriver, a small flathead screwdriver, and a 1/4 in. crescent wrench or nutdriver. Edition Date: September-1994 URL: http://digital.ni.com/manuals.nsf/websearch/3280448BD241723E862567210075584A

GPIB-232CT-A IBCL EPROM Installation Guide
This guide describes how to replace the factory-installed EPROM that comes with your GPIB-232CT-A. This kit is meant to be used with the GPIB-CT IBCL Reference Manual. Edition Date: September-1994 URL: http://digital.ni.com/manuals.nsf/websearch/9ED1DD79644BB5EC8625669F006D345C

GPIB-610 User Manual
Welcome to the family of National Instruments GPIB products and to the Model GPIB-610. The Model GPIB-610 is essentially two products in one in that it has the capability of operating in two different modes. In one mode, it allows the GPIB to be controlled from a computer or other intelligent Edition Date: September-1994 URL: http://digital.ni.com/manuals.nsf/websearch/4ED134447A12792E86256698004D9727

Getting Started with Your AT-GPIB/TNT and the NI-488.2 Software for DOS Graphics Applications
This manual contains instructions to help you install and configure the National Instruments AT-GPIB/TNT or AT-GPIB interface board and the NI-488.2 software for DOS graphics applications. The NI-488.2 software is intended for use with MS-DOS (version 3.0 or higher) or equivalent. This manual uses Edition Date: September-1994 URL: http://digital.ni.com/manuals.nsf/websearch/AF651B585230BB2486256DB1004A5F9A

Getting Started with Your AT-GPIB/TNT and the NI-488.2 Software for Windows Graphics Applications
This manual contains instructions to help you install and configure the National Instruments AT-GPIB/TNT or AT-GPIB interface board and the NI-488.2 software for Windows graphics applications. The NI-488.2 software is intended for use with Windows version 3.1 or higher. This manual uses the term Edition Date: September-1994 URL: http://digital.ni.com/manuals.nsf/websearch/AF67B5B2F89146F886256DB1004AABC3

Getting Started with Your VXIpc-486 Model 500 Series and Specifications
This manual contains instructions for installing and configuring the National Instruments VXIpc-486 Model 500 Series embedded computer. The Model 500 Series consists of the VXIpc-486 Models 500, 566, and 599 computers. Edition Date: September-1994 URL: http://digital.ni.com/manuals.nsf/websearch/6490334A5A83357A8625665E006359BD