GPIB-CT IBCL Reference Manual
This manual describes the National Instruments IBCL (Interface Bus Control Language) operating system for the GPIB-232CT, GPIB-422CT, and GPIB-232CT-A interface products. This manual describes the built-in IBCL commands and outlines techniques for adding new ones to the system. Edition Date: December-1993 URL: http://digital.ni.com/manuals.nsf/websearch/A7F2E32A3B12315F8625665E00687944

GPIB-VXI/CP Software Reference Manual
This manual contains information you will need to develop Code Instruments, which are custom software modules that run directly on the GPIB-VXI/C. This manual assumes that you are familiar with the VXIbus specification, as well as 68000 Assembly and C programming languages. Edition Date: December-1993 URL: http://digital.ni.com/manuals.nsf/websearch/913FE04C3FD6383D8625665F005DE24E

Getting Started with Your GPIB-1014 Series Board and the NI-488M Software for Themis and Specifications
This manual contains instructions for installing and configuring your National Instruments GPIB-1014 series interface board and NI-488M software for use with the Themis Sparc 2LC running SunOS 4.1.2 or higher. For specific information about the GPIB-1014, GPIB-1014D, GPIB-1014DP, or GPIB-1014P Edition Date: December-1993 URL: http://digital.ni.com/manuals.nsf/websearch/E22C1C144D135B4F8625669F006E1ACE

Getting Started with Your GPIB-98Turbo and the NI-488.2 Software for MS-DOS (Japanese)
This manual contains instructions for installing and configuring the GPIB-98Turbo interface board and the NI-488.2 software. Edition Date: December-1993 URL: http://digital.ni.com/manuals.nsf/websearch/95FBD0C3E2C3497886256DAC005E442A

TNT4882 Evaluation Board Installation Guide and Specification
This manual contains instructions to help you install and configure the National Instruments TNT4882 evaluation board. The TNT4882 evaluation board is intended for use in an ISA (PC AT) or compatible computer by developers of programmable instrumentation who are integrating the TNT4882 ASIC into Edition Date: December-1993 URL: http://digital.ni.com/manuals.nsf/websearch/076F30F6965C2B5786256DB00074CC1C

Universal Language Interface Using HP-Style Calls
This manual is intended for use with the NI-488 MS-DOS Software Reference Manual (part number 320135-01) or the NI-488.2 Software Reference Manual for MS-DOS (part number 320282-01). This manual contains information for programming the NI-488 driver using the Universal Language Interface (ULI) Edition Date: December-1993 URL: http://digital.ni.com/manuals.nsf/websearch/06E8D2604E6F6EE586256DB0006A15B8

GPIB Device Simulator EPROM Programming Manual
You can simulate the operation of a GPIB instrument by replacing the EPROM inside a GPIB-232CT with the GPIB Device Simulator EPROM (part number 702295-01). The GPIB-232CT will then act as a GPIB instrument. Edition Date: November-1993 URL: http://digital.ni.com/manuals.nsf/websearch/E4AA37F55990C6AF8625665F00613218

GPIB-1014DP User Manual and Specifications
The GPIB-1014DP is a double-height circuit board that interfaces the VMEbus to the IEEE-488 General Purpose Interface Bus (GPIB) providing two separate full function GPIB parts. The GPIB-1014DP provides a means to implement VMEbus test and measurement systems with standard interconnecting cables. Edition Date: November-1993 URL: http://digital.ni.com/manuals.nsf/websearch/C5D9FEFDA8B34DFD86256DBF0057F625

GPIB-130 User Manual and Specifications
This manual describes how to use the National Instruments GPIB-130 bus extender. Edition Date: November-1993 URL: http://digital.ni.com/manuals.nsf/websearch/82C070AACA09369486256DB0006C33C2

GPIB-PRL User Manual and Specifications
The GPIB-PRL is one of National Instruments family of MicroGPIB products. These products are high performance, low cost IEEE 488 support items, packaged in small all-metal cases, capable of being rack mounted. Edition Date: November-1993 URL: http://digital.ni.com/manuals.nsf/websearch/71259D1744C595E38625665E00635994