Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI
Manuals

Category(s) Selected [start over]

Edition
: 1992 [remove] ,
1-10 of 12
Manuals [see results below]. To refine your results, select another category.
Product
Software (1)
Instrument Connectivity (10)
VXI/VME (1)
Document Type
User Manual (1)
Getting Started (6)
Specifications (1)
Other (5)
Language
English (11)
Japanese (1)

Sort by:
1-10 of 12

Getting Started with Your VXI-AT2023 and the NI-VXI Software for ISC 386/ix
This manual contains instructions for installing and configuring the National Instruments VXI-AT2023 interface kit and the NI-VXI software for the ISC 386/ix Operating System. This manual is meant to be used with the NI-VXI Software Reference Manual for C (part number 320307-01) and the NI-VXI Text Edition Date: December-1992 URL: http://digital.ni.com/manuals.nsf/websearch/F9848EF394C12D858625665E006533AA

LabWindows Guidelines for Interrupt and DMA Programming in Loadable Object Modules
Contains general guidelines for coding and installing interrupt handlers and performing DMA transfers from within LabWindows loadable object module code. The guidelines apply to object module code for both instrument drivers and external modules. Edition Date: December-1992 URL: http://digital.ni.com/manuals.nsf/websearch/6FB760B533DAC0F18625665E006359D4

NI-488.2 MS-DOS Software Reference (Japanese)
This manual contains information about the NI-488.2 MS-DOS Software Reference (Japanese). Edition Date: December-1992 URL: http://digital.ni.com/manuals.nsf/websearch/4841353DC86A4AF986256DAC00601601

Note to Visual Basic for DOS Users
This note explains Visual Basic for DOS programming information not included in the NI-488.2 Software Reference Manual for MS-DOS (part number 320282-01). Edition Date: October-1992 URL: http://digital.ni.com/manuals.nsf/websearch/735900E717B0850586256DB0006E7DFD

Getting Started with Your TC-GPIB (or Digital's IET11) and the NI-488.2M Software for the DECstation 5000
This manual contains instructions for installing and configuring the National Instruments TC-GPIB interface board and the NI-488.2M multitasking software for use with a DECstation 5000 running the ULTRIX operating system. If your interface board is an IET11 unit bought from Digital Equipment Edition Date: September-1992 URL: http://digital.ni.com/manuals.nsf/websearch/75147E3DB23A86148625665E006358B8

NI-488 and NI-488.2 Subroutines for NKR BASIC
This manual contains information for programming the NI-488.2 routines and the NI-488 functions in NKR BASIC. The term NKR BASIC, as used in this manual, refers to NKR BASIC for MS-DOS. This manual assumes that the driver is installed and that you are familiar with the driver operation. Programming Edition Date: August-1992 URL: http://digital.ni.com/manuals.nsf/websearch/CB6FC0F60314F5148625666000757B32

Using NI-488.2 with NEC Windows
The NI-488.2 software for NEC Windows (hereafter referred to as Windows) includes a dynamic-link library and GPIB driver utilities. This manual describes how to install the files needed to execute Windows application programs that communicate over the IEEE 488 bus, and how to develop Windows Edition Date: August-1992 URL: http://digital.ni.com/manuals.nsf/websearch/AB37F96BE93EC46A86256DB0006C976F

AT-GPIB for Interactive UNIX System V
This manual contains instructions for installing and configuring the National Instruments AT-GPIB interface board and NI-488M multitasking software for use with the INTERACTIVE UNIX System V Release 3.2 operating system. The hardware and software are intended for use on a PC AT compatible computer Edition Date: July-1992 URL: http://digital.ni.com/manuals.nsf/websearch/9563B47CB74BF57E862566600078828D

GPIB-232CT User Manual
The GPIB-232CT User Manual describes the features, functions, and operation of the product. The GPIB-232CT is one of National Instruments family of MicroGPIB products. These products are high-performance, low-cost IEEE-488 support items, packaged in small all-metal cases, capable of being Edition Date: July-1992 URL: http://digital.ni.com/manuals.nsf/websearch/69E88C19A752915286256F5E005DCA15

Getting Started with Your GPIB-PCII/IIA and the NI-488.2 Software for MS-DOS
This manual contains instructions for installing and configuring the National Instruments GPIB-PCII/IIA interface board and NI-488.2 MS-DOS handler. This manual is meant to be used with the NI-488.2 ™ MS-DOS Software Reference Manual, Part Number 320282-01. Edition Date: June-1992 URL: http://digital.ni.com/manuals.nsf/websearch/2D09C3FF1D728B698625665E00635985

Sort by:
1-10 of 12