Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI
Manuals

Category(s) Selected [start over]

Document Type
: User Manual [remove] ,
Product
: Signal Conditioning [remove] ,
21-30 of 88
Manuals [see results below]. To refine your results, select another category.
Product
SCXI (45)
SCC (24)
5B Series (2)
SC Series Devices (4)
Sensors (2)
Accessories (13)
Edition
Current (66)
2008 (9)
2007 (6)
2006 (10)
2005 (8)
2004 (11)
2003 (1)
2002 (1)
2001 (4)
2000 (4)
More... 
1999 (9)
1998 (2)
1997 (1)
1996 (5)
1995 (6)
1994 (10)
1987 (1)
Language
English (86)
Japanese (2)

Sort by:
21-30 of 88
|

SCC-RLY01 Relay Module User Guide and Specifications
The SCC-RLY01 contains one single-pole double-throw (SPDT) nonlatching relay capable of switching 5 A at 30 VDC or 250 VAC when using an SCC-68. Any single E/M Series DAQ device digital input/output (P0.) line 0 to 7 can control the SCC-RLY01. Edition Date: May-2006 URL: http://digital.ni.com/manuals.nsf/websearch/1BECC1FA3A47A22D8625714F004E15A3

SCXI Chassis User Manual and Specifications
This manual describes the electrical and mechanical aspects of the SCXI-1000, SCXI-1000DC, and SCXI-1001 chassis and contains information concerning their operation. The SCXI chassis supply power to and contain control circuitry for the SCXI series of modules. The SCXI-1000 and SCXI-1000DC hold up Edition Date: April-2006 URL: http://digital.ni.com/manuals.nsf/websearch/6B35ECF27AA9216D8625712D00520A54

SCXI-1102/B/C User Manual and Specifications
The SCXI-1102/B/C modules are for signal conditioning of thermocouples, low-bandwidth volt and millivolt sources, 4 to 20 mA current sources, and 0 to 20 mA process-current sources. The SCXI-1102/B/C has 32 differential analog input channels and one cold-junction sensor channel. Each channel also Edition Date: April-2006 URL: http://digital.ni.com/manuals.nsf/websearch/2CDD38710DA595BB86257150006A6285

SCXI-1581 User Manual and Specifications
The SCXI-1581 module provides 32 channels of 100 uA current excitation. You can use the SCXI-1581 in any application that requires 100 uA fixed current excitation. Edition Date: April-2006 URL: http://digital.ni.com/manuals.nsf/websearch/995656D2993AFE8D86257145004CEF6C

SCXI-1521/B User Manual and Specifications
The SCXI-1521 and SCXI-1521B modules are 24-channel modules for interfacing to quarter-bridge strain gauges and are configured using Measurement & Automation Explorer (MAX) or through NI-DAQmx property nodes. The SCXI-1521 has 350 ohm completion resistors while the SCXI-1521B has 120 ohm completion Edition Date: March-2006 URL: http://digital.ni.com/manuals.nsf/websearch/BB8D5A5D0F9F2C2D8625712C005BBA83

SCC-A10 Voltage Attenuator Module User Guide and Specifications
The SCC-A10 voltage attenuator module accepts up to two voltage sources of 60 V maximum amplitude and attenuates each voltage by a factor of 10. A differential instrumentation amplifier buffers each input signal. The SCC-A10 contains circuitry capable of protecting E/M Series DAQ devices for input Edition Date: December-2005 URL: http://digital.ni.com/manuals.nsf/websearch/91DE4E5D395AD2C4862570C90057CC85

SCC-AI Series Isolated Analog Input Modules User Guide and Specifications
The SCC-AI Series isolated analog input modules can extract a relatively low-amplitude input signal from a high-common-mode voltage so the E/M Series DAQ device can measure the input signal. They also can amplify and filter the input signal, resulting in higher measurement resolution and accuracy. Edition Date: December-2005 URL: http://digital.ni.com/manuals.nsf/websearch/EC8954C20F3FD057862570C900577D66

SCC-AO10 Isolated Analog Output Module User Guide and Specifications
The SCC-AO10 is an isolated voltage output module with an output range of 10 V. The output voltage level is controlled by the DAC output of an E/M Series DAQ device. You can increase the output voltage level to 20 V by connecting two SCC-AO10 modules in series. Edition Date: December-2005 URL: http://digital.ni.com/manuals.nsf/websearch/3C8768ADF63D98A6862570C900585591

SCC-CO20 Isolated Current Output Module User Guide and Specifications
The SCC-CO20 is an isolated current output module that outputs up to 20 mA. The output current level is proportional to the voltage applied to the module by an analog output channel of an E/M Series DAQ device. Edition Date: December-2005 URL: http://digital.ni.com/manuals.nsf/websearch/5053360E687A369B862570C9005823AF

SCC-CTR01 Isolated Counter/Timer I/O Module User Guide and Specifications
The SCC-CTR01 is a two input and one output isolation module for general-purpose counter/timers on DAQ devices. Edition Date: September-2005 URL: http://digital.ni.com/manuals.nsf/websearch/AAFC29EDEC595FF0862570690075F34C

Sort by:
21-30 of 88
|