ENET-232 Series and ENET-485 Series User Manual for Windows 2000/NT 4.0 and Linux x86/Solaris 2.x and Specifications
This manual contains instructions to help you install and configure the National Instruments serial device server and the serial server software for Windows 2000/NT 4.0 (Service Pack 4 or higher) or Linux x86/Solaris 2.x. This manual includes information about the ENET-232 and ENET-485 serial Edition Date: November-2001 URL: http://digital.ni.com/manuals.nsf/websearch/3559990A2831401B86256AFC007C61A7

GPIB Hardware Guide and Specifications
This manual contains instructions to help you configure and install the AT-GPIB/TNT, GPIB-PCII/IIA, PC/104-GPIB, and NEC-GPIB/TNT interfaces, and to help you install the AT-GPIB/TNT (PnP), AT-GPIB/TNT+, GPIB-1394, GPIB-USB-A, NEC-GPIB/TNT (PnP), PCI-GPIB, PCI-GPIB+, PCMCIA-GPIB, PCMCIA-GPIB+, Edition Date: October-2001 URL: http://digital.ni.com/manuals.nsf/websearch/1A6E18E3B0D3BB8D86256BBA005D6CBD

Specification Correction for the NI 6036E Note to Users
Note: This document is not the most recent edition. Search to find out if a more recent edition is available. Edition Date: September-2001 URL: http://digital.ni.com/manuals.nsf/websearch/40003B9137B94B3C86256A96006B105E

NI 8171 Series User Manual
This manual contains detailed instructions for installing and configuring your National Instruments NI 8171 series embedded computer kit. The NI 8171 series includes the NI 8176, NI 8175, and NI 8174 embedded PXI computers. Edition Date: August-2001 URL: http://digital.ni.com/manuals.nsf/websearch/8D62E7917025CCC886256ABE004D3D0C

PXI-8140RT Series User Manual and Specifications
This manual contains detailed instructions for installing and configuring your National Instruments PXI-8140RT Series embedded PXI computer. The PXI-8140RT Series includes all models of the PXI-8145RT and PXI-8146RT embedded PXI computers. The PXI-8140 RT Series includes all models of the Edition Date: July-2001 URL: http://digital.ni.com/manuals.nsf/websearch/6EF72E1DA17CB52A86256A8B006399F2

TBX-96 Terminal Block Installation Guide and Specifications
This guide describes how to install and use the TBX-96 terminal block with the SCXI-1100, SCXI-1102B/C, SCXI-1104/C, and SCXI-1581 modules. The TBX-96 is a shielded, DIN-rail mountable terminal block with 96 screw terminals for easy connection to the SCXI-1100, SCXI-1102B/C, SCXI-1104/C, and Edition Date: July-2001 URL: http://digital.ni.com/manuals.nsf/websearch/FF362E4434D80AE886256A95006CB095

Getting Started with Your GPIB-SCSI-A and NI-488.2 for Solaris and Specifications
Chapter 1 explains how to use this manual, lists what you need to get started, and briefly describes the GPIB-SCSI-A and NI-488.2 for Solaris.Chapter 2 describes how to install NI-488.2 for Solaris and how to configure and connect the GPIB-SCSI-A to your Sun SPARC system. Chapter 3 describes how to Edition Date: June-2001 URL: http://digital.ni.com/manuals.nsf/websearch/3245E08EA22AB46686256A6900707CC9

Getting Started with Your SB-GPIB/TNT and NI-488.2 for Solaris and Specifications
This manual contains instructions for installing and configuring the National Instruments SB-GPIB/TNT or SB-GPIB interface board and NI-488.2M software. The GPIB hardware and NI-488.2M software should be used with a Sun SPARCstation workstation with SBus slots running Solaris 2.1.5 or higher. This Edition Date: June-2001 URL: http://digital.ni.com/manuals.nsf/websearch/E87C9146672DDF8386256A6800660DD0

MID-7654/7652 Servo Power Motor Drive User Guide and Specifications
This user guide describes the electrical and mechanical aspects of the MID-7654/7652 servo power motor drive and describes how to use the MID-7654/7652 with your motion controller. Edition Date: June-2001 URL: http://digital.ni.com/manuals.nsf/websearch/E382785B7D67553E86256A5D0072BBE1

Specification Addendum for the AT-AI-16XE-10 (Revision B), AT-MIO-16XE-10 (Revision B), PCI-6031E (Revision A), PCI-6032E (Revision C), PCI-6033E (Revision A), PCI-MIO-16XE-10 (Revisions A-C), VXI-MIO-64E-1 (Revisions B-F), VXI-MIO-64XE-10 (Revisions A-E), PXI -6030E (Revisions A-D), PXI-6031E (Revisions A-B) Note to Users
The onboard calibration reference specification is incomplete in both the Analog Input and Analog Output sections of Appendix A, Specifications in the user manual for each of these products. This PDF contains the corrected specification, with the addition in italics. Edition Date: June-2001 URL: http://digital.ni.com/manuals.nsf/websearch/71FAB076E357A0D486256A62007508A5