Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI
Manuals

Category(s) Selected [start over]

Document Type
: Specifications [remove] ,
Edition
: 1996 [remove] ,
1-10 de 19
Manuals [see results below]. To refine your results, select another category.
Product
Data Acquisition (4)
Signal Conditioning (4)
Switches (1)
Instrument Connectivity (6)
Industrial Communications (1)
VXI/VME (6)

Sort by:
1-10 de 19

ER-8/16 User Manual and Specifications
This manual describes the electrical and mechanical aspects of the ER-8 and ER-16 and contains information concerning their setup, operation, and safety. Both the ER-8 and ER-16 are single-pole double-throw (SPDT) relay accessories for use with other data acquisition (DAQ) products. The ER-8 has Edition Date: December-1996 URL: http://digital.ni.com/manuals.nsf/websearch/0CC0C559A9660A9D8625665E00635884

Getting Started with Your Serial Hardware and Software for Windows 95 and Specifications
This manual contains instructions to help you install and configure the National Instruments serial hardware and the NI Serial software for Windows 95. The serial hardware covered by this manual includes the AT-232/2, AT-232/4, AT-485/2, AT-485/4, PCMCIA-232, PCMCIA-232/2, PCMCIA-485, and Edition Date: December-1996 URL: http://digital.ni.com/manuals.nsf/websearch/C35B782A3C59FE698625665F004FA959

SCXI-1200 User Manual and Specifications
This manual describes the electrical and mechanical aspects of the SCXI-1200 module and contains information concerning its operation and programming. The SCXI-1200 is a member of the National Instruments Signal Conditioning eXtensions for Instrumentation (SCXI) Series modules. The SCXI-1200 is a Edition Date: December-1996 URL: http://digital.ni.com/manuals.nsf/websearch/BA1C5207CD9AFF078625665F00558779

VXI-1200 User Manual
The VXI-1200 User Manual describes the features of the VXI-1200 FlexFrame, hereafter referred to as the VXI-1200. This manual contains information about configuring the mainframe, installing modules, operating and using the VXI-1200. Edition Date: December-1996 URL: http://digital.ni.com/manuals.nsf/websearch/700F1A1260DE3FBE8625665E0068FA56

Settling Characteristics on the AT/PCI/DAQPad-MIO-16XE-50
The MIO-16XE-50 does not meet the anticipated analog input settling specifications as stated in Appendix A of the AT-MIO/AI E Series User Manual, May 1996 Edition; the PCI-MIO E Edition Date: October-1996 URL: http://digital.ni.com/manuals.nsf/websearch/0B2FC4E9FE10C5AF8625665E00635A20

Specifications for the DAQCard-AI-16XE-50
The DAQCard-AI-16XE-50 does not meet the anticipated linearity and settling specifications as stated in Appendix A of the DAQCard E Series User Manual, June 1996 Edition. Edition Date: September-1996 URL: http://digital.ni.com/manuals.nsf/websearch/6B4038404C0BD9218625665E00642111

VXI-MXI-2 User Manual and Specifications
The VXI-MXI-2 User Manual describes the functional, physical, and electrical aspects of the VXI-MXI-2 and VXI-MXI-2/B and contains information concerning its operation and programming. This manual uses the term VXI-MXI-2 to describe both the C-size VXI-MXI-2 and the B-size VXI-MXI-2/B except where Edition Date: August-1996 URL: http://digital.ni.com/manuals.nsf/websearch/18654F0B0D50A4528625665E007507B8

Transfer Characteristics on the DAQCard-AI-16XE-50
The DAQCard-AI-16XE-50 does not meet the anticipated relative accuracy and DNL specifications as stated in Appendix A of the DAQCard E Series User Manual, June 1996 Edition. The actual specifications for Edition Date: July-1996 URL: http://digital.ni.com/manuals.nsf/websearch/E2A52E24507A0B3F8625665E00649548

Getting Started with Your EISA-GPIB and the NI-488.2M Software for HP 9000 Series 700 and Specifications
This manual contains instructions to help you install and configure the National Instruments EISA-GPIB interface board and the NI-488.2 multitasking software (NI-488.2M) driver for the HP-UX operating system, version 9.01 and higher. The hardware and software are intended for use on an HP 9000 Edition Date: June-1996 URL: http://digital.ni.com/manuals.nsf/websearch/F385CDFC5E5D4C148625665E006358C9

Getting Started with Your GPIB-ENET and the GPIB Software for Windows 95 and Specifications
This manual contains instructions to help you install and configure the National Instruments GPIB-ENET hardware and the GPIB software for Windows 95. This manual assumes that you are already familiar with Windows 95 and with TCP/IP networks, and that your computer is connected to an Ethernet Edition Date: June-1996 URL: http://digital.ni.com/manuals.nsf/websearch/4D67A55505535C2D8625665F0054E43C

Sort by:
1-10 de 19