NB-DMA2800 User Manual and Specifications
The NB-DMA2800 is a block-mode direct memory access (DMA) and GPIB interface board for Macintosh NuBus computers. Other National Instruments NB Series boards are serviced by the NB-DMA2800 so that acquired data is transferred directly to memory. The NB-DMA2800 also contains a high-performance NuBus Edition Date: November-1995 URL: http://digital.ni.com/manuals.nsf/websearch/0E4D495BB405D5E886256803004C35CC

Getting Started with Your GPIB-ENET and the NI-488.2M Software for the HP Series 700 and Specifications
This manual contains instructions for installing and configuring the National Instruments GPIB-ENET and NI-488.2M multitasking software driver for use with the Hewlett-Packard 9000 Series 700 workstation running HP-UX version 9.01 or higher. This manual is meant to be used with the National Edition Date: October-1995 URL: http://digital.ni.com/manuals.nsf/websearch/6CF4B3A7CC5438768625665E006358BE

Getting Started with Your GPIB-ENET and the NI-488.2M Software for the Sun SPARCstation and Specifications
This manual contains instructions for installing and configuring the National Instruments GPIB-ENET and NI-488.2M multitasking software driver for use with the Sun SPARCstation running under SunOS 4.1.2 or higher operating system. This manual is meant to be used with the NI -488.2M Software Edition Date: October-1995 URL: http://digital.ni.com/manuals.nsf/websearch/329C350DB44C09F98625665E006358BC

VXI-MXI-2 User Manual
The VXI-MXI-2 User Manual describes the functional, physical, and electrical aspects of the VXI-MXI-2 and contains information concerning its operation and programming. Edition Date: October-1995 URL: http://digital.ni.com/manuals.nsf/websearch/576A4BA1297B24C88625665F005D4E68

Getting Started with Your GPIB-SCSI-A and the NI-488M Software for Silicon Graphics Challenge Servers Running IRIX 5.x/6.x and Specifications
This manual contains instructions for installing and configuring the National Instruments GPIB-SCSI-A Controller and NI-488M software for use with Silicon Graphics Challenge servers running IRIX 5.x/6.x. This manual is meant to be used with the NI-488M Software Reference Manual. Edition Date: September-1995 URL: http://digital.ni.com/manuals.nsf/websearch/681223CC9AA8E2058625665E006358CC

GPIB-140 User Manual and Specifications
This manual describes how to install, configure, and operate the National Instruments GPIB-140 or GPIB-140/2 bus extender. Edition Date: June-1995 URL: http://digital.ni.com/manuals.nsf/websearch/B2DE4A1C0BCE3A788625665E006359AA

Getting Started with Your MC-GPIB and the NI-488M Software for the IBM RISC System/6000 and Specifications
This manual contains instructions for installing and configuring the National Instruments MC-GPIB interface board and the NI-488M multitasking software driver for use with the IBM AIX Operating System. This package is intended for use on an IBM RISC System/6000 workstation. This manual is meant to Edition Date: June-1995 URL: http://digital.ni.com/manuals.nsf/websearch/F5B782EC5D58488E8625665F0058DA4A

ESP-488 Software Reference Manual for the GPIB-ENET and Specifications
This manual describes the ESP-488 software in C for the GPIB-ENET and advanced GPIB-ENET programming information. While this manual was written specifically for the GPIB-ENET, the information also applies to the GPIB-ENET/100. Edition Date: February-1995 URL: http://digital.ni.com/manuals.nsf/websearch/E5323AA8C8545ED58625665E006848A0

Getting Started with Your GPIB-ENET and the NI-488.2M Software for OSF/1 and Specifications
This manual contains instructions for installing and configuring the National Instruments GPIB-ENET and NI-488.2M multitasking software driver for use with a DEC Alpha AXP workstation running the OSF/1 operating system. This manual is meant to be used with the NI -488.2M Software Reference Manual. Edition Date: February-1995 URL: http://digital.ni.com/manuals.nsf/websearch/8EC3F1A2F106AA5A8625665E006358CA

GPIB-ENET and NI-488.2 Software for Macintosh and Specifications
This manual contains instructions for installing and configuring the National Instruments GPIB-ENET and NI-488.2 software for Macintosh. This manual is meant to be used with the NI-488.2 User Manual for Macintosh and the NI-488.2 Function Reference Manual for Macintosh. This manual assumes that you Edition Date: January-1995 URL: http://digital.ni.com/manuals.nsf/websearch/6DE3F45FEFD647CA86256721005E9A6D