Replacing Your RF 2590 Relay Module
The NI 2590 is constructed so you can replace the relay module when the relays fail. The life of the relay is nominally 10 5 operations when switching the maximum rated load. You can order an RF 2590 replacement relay module for your NI 2590 from National Instruments. The replacement kit contains Edition Date: May-1999 URL: http://digital.ni.com/manuals.nsf/websearch/EEF4522B5D276CB486256790005952A8

Updating Your Network Module Firmware and FieldPoint Software for Use with the FP-CTR-500, FP-PWM-520, and FP-DO-410
Note: This document is not the most recent edition. Search to find out if a more recent edition is available. Edition Date: May-1999 URL: http://digital.ni.com/manuals.nsf/websearch/44447D2812F93D8C8625678400732EFF

Note to Users: About Revisions G and N of the DAQCard-1200
Read this document if you are a register-level programmer or if you are using NI-DAQ version 5.0.3 or earlier and cannot upgrade your software. Edition Date: April-1999 URL: http://digital.ni.com/manuals.nsf/websearch/E2733B5677786C3286256793005C4241

BridgeVIEW 2.1 Addendum
This addendum describes all of the new BridgeVIEW 2.1 features, compatibility issues, and configuration, installation, and upgrade information. Upgrade issues pertain to BridgeVIEW 2.1 only. Edition Date: March-1999 URL: http://digital.ni.com/manuals.nsf/websearch/DFCEE4895E20D9608625678400766DE3

IVI Note to LabVIEW Users
The IVI Driver Library (777855-03) requires LabVIEW 5.1. If you are a LabVIEW user, and you have not upgraded to LabVIEW 5.1, you are entitled to a free upgrade. You should have been prompted to order the LabVIEW 5.1 upgrade at the time you purchased the IVI Driver Library. If you have not ordered Edition Date: March-1999 URL: http://digital.ni.com/manuals.nsf/websearch/8FC15B64D5B16D988625679100762A0C

Important Note to TestStand Users
Note: This document is not the most recent edition. Search to find out if a more recent edition is available. Edition Date: March-1999 URL: http://digital.ni.com/manuals.nsf/websearch/68260CDFE55F78FD862567910075D795

Read Me First: Where to Start with Your NI 5401 PXI/PCI-Based Arbitrary Function Generator
This document is obsolete. Please refer to the NI Signal Generators Getting Started Guide. Edition Date: March-1999 URL: http://digital.ni.com/manuals.nsf/websearch/72BC1E26661EB1258625675C0073B377

Read Me First: Where to Start with Your NI 5411 PXI/ISA/PCI-Based Arbitrary Waveform Generator
This document is obsolete. Please refer to the NI Signal Generators Getting Started Guide. Edition Date: March-1999 URL: http://digital.ni.com/manuals.nsf/websearch/E86751DF1CBB37AC86256746007163F5

SCXIbus System Specification
This specification describes the physical, electrical, and timing requirements for the SCXIbus. The system objectives of the SCXIbus specification are as follows: • To specify the system characteristics that allow a module to control other modules or be controlled via the serial bus • To specify Edition Date: March-1999 URL: http://digital.ni.com/manuals.nsf/websearch/C0B41C7DEE4247CB86256740007C34F3

Addendum pour la version 5.1 (French)
Cet addendum décrit toutes les nouvelles fonctions, tous les problèmes de compatibilité et toutes les informations de configuration, installation et mise à jour de LabVIEW 5.1. Les questions de mise à jour concernent uniquement LabVIEW 5.1. Edition Date: February-1999 URL: http://digital.ni.com/manuals.nsf/websearch/242EBD130422F2E0862567300054AAA3