DAQ Hardware Overview Guide
The DAQ Hardware Overview Guide is for users of the NI-DAQ software for PC compatibles version 6.0. NI-DAQ software is a powerful application programming interface (API) between your data acquisition (DAQ) application and the National Instruments DAQ devices for ISA and EISA bus computers. Edition Date: December-1997 URL: http://digital.ni.com/manuals.nsf/websearch/48C06A8D408C1CEB8625665E0063589A

Read Me First: VXIpc Embedded Controller for vxWorks
This document contains information to help you understand the components of your kit, determine where to start setting up your kit, and learn about the NI-VXI features. Edition Date: December-1997 URL: http://digital.ni.com/manuals.nsf/websearch/8A3982F73BEAD97E8625665F005C3161

Specification Change for the PXI-1000
Some of the DB-9 connector pinout information in Chapter 2, Installation and Configuration, of your PXI-1000 User Manual is incorrect. This note replaces that information. Edition Date: December-1997 URL: http://digital.ni.com/manuals.nsf/websearch/34DFEE0EAF91B33C8625665E006358D3

Note to Users: Specification Changes on the AT-A2150 and AT-DSP2200
Due to a component change on revision E or higher of the AT-A2150 board and revision F or higher of the AT-DSP2200 board, the specifications listed below have changed. If you have earlier revisions of these boards, you can disregard this note; the specifications in your user manual are correct. Edition Date: November-1997 URL: http://digital.ni.com/manuals.nsf/websearch/3093AD437A876D048625665E00635957

LabVIEW Demonstration Guide (Japanese)
The LabVIEW Demonstration Guide contains the information you need to get started with the Laboratory Virtual Instrument Engineering Workbench (LabVIEW) software package. LabVIEW simplifies scientific computation, process control, and test and measurement applications, and you can also use it for a Edition Date: October-1997 URL: http://digital.ni.com/manuals.nsf/websearch/766476A94D54406A86256736005B482E

Note to Users About Revision P of the AT-MIO-16E-10
NI-DAQ Users AT-MIO-16E-10 revision P boards require NI-DAQ version 5.1 or greater for Windows 95/NT, or version 5.0.4 for Windows 3.1x. If you have an earlier version of NI-DAQ, you must upgrade your driver software. AT-MIO-16E-10 revision P replaces revision C, which will be discontinued after Edition Date: October-1997 URL: http://digital.ni.com/manuals.nsf/websearch/91369061B140B71B8625665E0063595B

Note: Discontinuation of Revision C of the AT-MIO-16E-10
Note: Read this document if you are using NI-DAQ 5.0.3 or earlier or if you are a register-level programmer. You may have revision C of the AT-MIO-16E-10; this revision will be discontinued after November 1, 1998 and will be replaced by revision P boards. Because National Instruments will accept Edition Date: October-1997 URL: http://digital.ni.com/manuals.nsf/websearch/29A43403196D5D928625665E00635954

Read Me First: PXI-8150 Series for Windows 95/NT
This document contains information to help you understand the components of your kit, determine where to start setting up your kit, and learn about the NI-VISA features. Edition Date: October-1997 URL: http://digital.ni.com/manuals.nsf/websearch/2832A46BCFD903358625665E006358D2

Read Me First: VXI plugplay Software Kit: NI-VISA for Solaris 2.x: SUN and GSUN Frameworks
Note: This document is not the most recent edition. Search to find out if a more recent edition is available. Edition Date: October-1997 URL: http://digital.ni.com/manuals.nsf/websearch/9B74AB145183B67C8625665E00635965

Guide d'évaluation LabVIEW (French)
Note: This document is not the most recent edition. Search to find out if a more recent edition is available. Edition Date: September-1997 URL: http://digital.ni.com/manuals.nsf/websearch/40173B3EDAE7A267862567220058EA69