GPIB SWITCH2 Product Information
The National Instruments GPIB-SWITCH2 is a manually operated mechanical switch used to connect two IEEE 488-compatible devices to one common IEEE 488-compatible device. Edition Date: December-1994 URL: http://digital.ni.com/manuals.nsf/websearch/65FCBF8E488A78368625665D0064918D

Warning: Maximum Signal Ratings for AT-MIO Series Boards
Note: National Instruments is not liable for any damages resulting from signal connections that exceed these ratings. Refer to your warranty for specific information on warranty coverage. Connections that exceed any of the maximum ratings of input signals on the following AT-MIO Series boards can Edition Date: November-1994 URL: http://digital.ni.com/manuals.nsf/websearch/CB098A8243B0514D8625665E0063595C

Documentation Notice: AT-GPIB and Windows Compatibility
The built-in GPIB Talker/Listener/Controller port on your VXIpc-486 module is application compatible with the National Instruments AT-GPIB plug-in board, the industry-standard GPIB interface for ISA (PC AT) computers. Your VXIpc-486 port uses the same GPIB hardware circuitry as the AT-GPIB, Edition Date: October-1994 URL: http://digital.ni.com/manuals.nsf/websearch/873B5B24F6FC68518625665E006359F9

GPIB-SWITCH4 Product Information
The National Instruments GPIB-SWITCH4 is a manually operated mechanical switch used to connect four IEEE 488-compatible devices to one common IEEE 488-compatible device. Edition Date: October-1994 URL: http://digital.ni.com/manuals.nsf/websearch/48883A6ABC0281718625665E006358D7

VXIpc-486 Documentation Notice: AT-GPIB and Windows NT Compatibility
The built-in GPIB Talker/Listener/Controller port on your VXIpc-486 module is application compatible with the National Instruments AT-GPIB plug-in board, the industry-standard GPIB interface for ISA (PC AT) computers. Your VXIpc-486 port uses the same GPIB hardware circuitry as the AT-GPIB, Edition Date: October-1994 URL: http://digital.ni.com/manuals.nsf/websearch/9D61298FB80958C386256721005F0044

Warnings to BP-1 and SCXI-1382 Users
NI Home This Document is not yet Rated Rate this Document Warnings to BP-1 and SCXI-1382 Users Edition Date: September 1994 Part Number: 320870A-01 View PDF View the document in Adobe Acrobat PDF format. (File size: 13 KB) Right-click the link above and select Save Link/Target As to download the Edition Date: September-1994 URL: http://digital.ni.com/manuals.nsf/websearch/41FDB644CCD057DF8625665F0053D8C4

Note to Turbo C/C++ Users
Note to Turbo C/C++ Users The NI-488.2 Software Reference Manual for MS-DOS (part number 320282-01) contains Microsoft C formats and examples for the NI-488.2 routines and NI-488 functions. The Microsoft C syntax used in each routine and function in this manual is compatible with your Turbo C and Edition Date: May-1994 URL: http://digital.ni.com/manuals.nsf/websearch/6226079AF965C69586256660007705B2

Getting Started with Your MC-GPIB and the NI-488.2M Software for OS/2
This manual contains instructions for installing and configuring the National Instruments MC-GPIB board and the NI-488.2M software for OS/2. The NI-488.2M software package is meant to be used with OS/2 (IBM Operating System/2) version 2.0 or higher. This manual assumes that you are already familiar Edition Date: April-1994 URL: http://digital.ni.com/manuals.nsf/websearch/E08330089FE8731486256DBF005BE4DF

Note to NI-DAQ Software for Macintosh Users
Note: This document is not the most recent edition. Search to find out if a more recent edition is available. Edition Date: January-1994 URL: http://digital.ni.com/manuals.nsf/websearch/EBD24E1204A6B5F18625665E0063590C