Getting Started with Multichassis Synchronization Using the NI PXI-6653 and the NI PXI-4472
This document describes three typical hardware configurations where the NI PXI-6653 (NI 6653) enables synchronization for NI PXI-4472 (NI 4472) Dynamic Signal Acquisition (DSA) modules located in multiple PXI chassis. The necessary hardware, signal connections, and example code are described for Edition Date: December-2002 URL: http://digital.ni.com/manuals.nsf/websearch/DE365B71A102065086256C930065978A

Getting Started with PCI/PXI-8232 for Windows NT 4.0
This card contains instructions for installing the PCI/PXI-8232 software on the Windows NT 4.0 operating system Edition Date: December-2002 URL: http://digital.ni.com/manuals.nsf/websearch/0A884DE3DE16411606256CC600688FB6

Getting Started with PXI-8231 for Windows
Note: This document is not the most recent edition. Search to find out if a more recent edition is available. Edition Date: December-2002 URL: http://digital.ni.com/manuals.nsf/websearch/FF25F260391FF99A06256CC60068335B

Getting Started: PCI/PXI-8232 for Windows
Note: This document is not the most recent edition. Search to find out if a more recent edition is available. Edition Date: December-2002 URL: http://digital.ni.com/manuals.nsf/websearch/18FC726A30BB99FC86256CF60079DACD

Getting Started with Your PCI-MXI-2 and the NI-VXI/NI-VISA Software for Linux
This manual contains instructions for installing and configuring the National Instruments PCI-MXI-2 kits for Linux. The VXI MXI-2 kit includes a VXI-MXI-2 module that plugs into a VXI mainframe and links your PCI-based computer to the VXIbus. The VME MXI-2 kit includes a VME-MXI-2 that plugs into a Edition Date: October-2002 URL: http://digital.ni.com/manuals.nsf/websearch/3631A33BE7AE101886256C6000787FD5

NI Sources Getting Started Guide
This document explains how to install, configure, test, and set up an NI source module to generate various waveforms. For more information on your NI source module and programming, refer to NI Sources Help at Program Files»National Instruments»NI-FGEN»NI Sources Help. For more information about Edition Date: October-2002 URL: http://digital.ni.com/manuals.nsf/websearch/E063CC711BF62C2986256C4F006CBABF

Where to Start with the NI 435X
The NI 4350/4351 (NI 435X) devices are precision computer-based digitizers designed specifically for high-accuracy temperature measurements, resistance measurements, chromatography measurements, and for low-frequency analog signals with +/- 15 V. The instruments are available for PCI, Edition Date: October-2002 URL: http://digital.ni.com/manuals.nsf/websearch/BF0979B82A16F00C86256C5B0073557F

Getting Started with Your PCI-MXI-2 and the NI-VXI/NI-VISA Software for Linux
This manual contains instructions for installing and configuring the National Instruments PCI-MXI-2 kits for Linux. The VXI MXI-2 kit includes a VXI-MXI-2 module that plugs into a VXI mainframe and links your PCI-based computer to the VXIbus. The VME MXI-2 kit includes a VME-MXI-2 that plugs into a Edition Date: September-2002 URL: http://digital.ni.com/manuals.nsf/websearch/C3B5150891B2CA6686256C250075D53F

Getting Started with LabVIEW and Tektronix Open Windows Oscilloscopes
This manual contains basic information you need to use LabVIEW with a Tektronix Open Windows oscilloscope. Edition Date: August-2002 URL: http://digital.ni.com/manuals.nsf/websearch/A314E1436BFFA6F286256BF70055DC75

Getting Started with Your PC-Based MXI-2 Interface for Windows
This manual contains instructions for installing and configuring the National Instruments PCI-based MXI-2 interface kit for Windows. This manual is meant to be used with the MXI-2 Configuration Reference Manual. Your kit contains either a VXI-MXI-2 or VME-MXI-2, which plugs into your VXI or VME Edition Date: August-2002 URL: http://digital.ni.com/manuals.nsf/websearch/AB288346CAFDFBD886256C0E007A1321