Getting Started with Your VXI/VME-PCI8040 and the NI-VXI Software for Macintosh
This manual contains instructions for installing and configuring the National Instruments VXI-PCI8040 or VME-PCI8040 interface kit for the Macintosh operating system. The VXI-PCI8040 kit includes a VXI -MXI-2 module, which plugs into a VXI mainframe and links your PCI -based Macintosh computer to Edition Date: April-1996 URL: http://digital.ni.com/manuals.nsf/websearch/D19D369AB2178C338625665E0061A218

Getting Started with Your VXIpc-850
You can use this manual to help you get a quick start with the VXIpc-850 Series embedded computer and the NI-VXI software. This manual summarizes the setup instructions and default settings for the hardware and software. You may find that these sections contain as much information as you need to Edition Date: April-1996 URL: http://digital.ni.com/manuals.nsf/websearch/EFB65B0158CB45098625665F005517A7

Getting Started with Your PCI-GPIB and the NI-488.2M Software for Digital UNIX
This manual contains instructions for installing and configuring the National Instruments PCI-GPIB interface board and the NI-488.2M multitasking software for use with a DEC Alpha Station running the Digital UNIX operating system. This manual is meant to be used with the NI -488.2M Software Edition Date: March-1996 URL: http://digital.ni.com/manuals.nsf/websearch/A7C61F1DEE0800FF8625665E006358CB

Getting Started with Your VXI/VME-PCI8000 Series and the NI-VXI Software for Microsoft Operating Systems
This manual contains instructions for installing and configuring the National Instruments VXI-PCI8000 or VME-PCI8000 Series interface kit for Microsoft operating systems. The VXI-PCI8000 kit includes a VXI-MXI-2 module, which plugs into a VXI mainframe and links your PCI-based computer to the Edition Date: March-1996 URL: http://digital.ni.com/manuals.nsf/websearch/464832FFBBCC2D738625665E006DC8AB

Getting Started with Your AT-GPIB/TNT+, the NI-488.2 Software for Windows, and the GPIB Analyzer
This manual contains instructions to help you install and configure the National Instruments AT-GPIB/TNT+ interface board, the NI-488.2 software for Windows, and the GPIB analyzer. The NI-488.2 software and the GPIB analyzer are intended for use with Windows version 3.1 or higher. This manual Edition Date: January-1996 URL: http://digital.ni.com/manuals.nsf/websearch/41DE85791382CE0C86256DB1004CAAD4

Getting Started with Your GPIB-SCSI-A and the NI-488M Software for the Silicon Graphics IRIS Indigo/Personal IRIS Running IRIX 4.x and Specifications
This manual contains instructions for installing and configuring the National Instruments GPIB-SCSI-A SCSI–to–IEEE 488 Controller and NI-488M multitasking software for use with the Silicon Graphics IRIS Indigo or Personal IRIS running under the IRIX 4.0.x operating system. This manual is meant to Edition Date: January-1996 URL: http://digital.ni.com/manuals.nsf/websearch/78AA919C7114BB4C8625665E006358BB