Getting Started with Your IMAQ PCI-1408 and the NI-IMAQ Software for Windows 95/NT
Getting Started with Your IMAQ PCI-1408 and the NI-IMAQ Software for Windows 95/NT describes the features, functions, and operation of the PCI-1408. The PCI-1408 is a high-accuracy, monochrome PCI image acquisition (IMAQ) board that supports RS-170, CCIR, NTSC, and PAL video standards from any of Edition Date: November-1996 URL: http://digital.ni.com/manuals.nsf/websearch/A6E5EB5F3D65D5B68625665F004EEB69

Getting Started with Your AT-GPIB/TNT+ and the GPIB Software for Windows NT
This manual contains instructions for installing and configuring the National Instruments AT-GPIB/TNT+ interface and the GPIB software for Windows NT. The GPIB software is intended for use with Windows NT version 4.0 or higher. Edition Date: October-1996 URL: http://digital.ni.com/manuals.nsf/websearch/5019E2752B4E9E1E8625665D0071EFC4

Getting Started with LabWindows/CVI
Getting Started with LabWindows/CVI is a hands-on introduction to the LabWindows/CVI software package. This manual is intended for use by first-time LabWindows/CVI users. To use this manual effectively, you should be familiar with DOS, Windows, and the C programming language. Edition Date: July-1996 URL: http://digital.ni.com/manuals.nsf/websearch/FD836A6A32FBB5178625665E006359D9

Getting Started with Your GPIB-SCSI-A and the NI-488M Software for the Silicon Graphics Indigo 2 /Indy Running IRIX
This manual contains instructions for installing and configuring the National Instruments GPIB-SCSI-A SCSI-to-IEEE 488 Controller and NI-488M multitasking software for use with the Silicon Graphics Indigo 2 /Indy running under the IRIX operating system. This manual is meant to be used with the Edition Date: July-1996 URL: http://digital.ni.com/manuals.nsf/websearch/03E4C7AB972768E58625665E006358C5

Getting Started with Your PCI-GPIB or PCMCIA-GPIB and the NI-488.2M Software for Windows NT
This manual contains instructions for installing and configuring the National Instruments PCMCIA-GPIB or PCI-GPIB and the NI-488.2M software for Windows NT. The NI-488.2M software is intended for use with Microsoft Windows NT version 3.51 or higher. This manual assumes that you are already familiar Edition Date: July-1996 URL: http://digital.ni.com/manuals.nsf/websearch/1E719F67E999F8728625665E00630150

Getting Started with Your EISA-GPIB and the NI-488.2M Software for HP 9000 Series 700 and Specifications
This manual contains instructions to help you install and configure the National Instruments EISA-GPIB interface board and the NI-488.2 multitasking software (NI-488.2M) driver for the HP-UX operating system, version 9.01 and higher. The hardware and software are intended for use on an HP 9000 Edition Date: June-1996 URL: http://digital.ni.com/manuals.nsf/websearch/F385CDFC5E5D4C148625665E006358C9

Getting Started with Your GPIB-ENET and the GPIB Software for Windows 95 and Specifications
This manual contains instructions to help you install and configure the National Instruments GPIB-ENET hardware and the GPIB software for Windows 95. This manual assumes that you are already familiar with Windows 95 and with TCP/IP networks, and that your computer is connected to an Ethernet Edition Date: June-1996 URL: http://digital.ni.com/manuals.nsf/websearch/4D67A55505535C2D8625665F0054E43C

Getting Started with Your Non Plug and Play GPIB Hardware and Software for Windows 95
This manual contains instructions to help you install and configure the National Instruments Non Plug and Play GPIB hardware and software for Windows 95. The Non Plug and Play GPIB hardware includes the AT-GPIB/TNT and the EISA-GPIB. This manual assumes that you are already familiar with Windows 95. Edition Date: June-1996 URL: http://digital.ni.com/manuals.nsf/websearch/51B4AA5D29FF58398625665F005351D2

Getting Started with Your Plug and Play GPIB Hardware and Software for Windows 95
This manual contains instructions to help you install and configure the National Instruments Plug and Play GPIB hardware and software for Windows 95. The Plug and Play GPIB hardware includes the AT-GPIB/TNT (PnP), AT-GPIB/TNT+, PCI-GPIB, PCMCIA-GPIB+, PCMCIA-GPIB, and NEC-GPIB/TNTÊ(PnP). This Edition Date: June-1996 URL: http://digital.ni.com/manuals.nsf/websearch/2919F9CDBFF1F9238625665E0065D4A1

Getting Started with Your AT Serial Board for Windows 95 and Specifications
This manual contains instructions to help you install and configure the National Instruments Plug and Play AT serial interface board and the NI serial driver software for Windows 95. The board is intended for use in personal computers equipped with 16-bit ISA slots. The NI serial driver software is Edition Date: April-1996 URL: http://digital.ni.com/manuals.nsf/websearch/FCB42B5D52F011D38625665F004F45DA