Getting Started with Your PC/104-GPIB and the NI-488.2 Software for Windows
This manual contains instructions to help you install and configure the National Instruments PC/104-GPIB interface board and the NI-488.2 software for Windows. The interface board is intended for use in a PC/104-based system. The NI-488.2 software is intended for use with Windows version 3.1 or Edition Date: April-1995 URL: http://digital.ni.com/manuals.nsf/websearch/F75ACE2E9628810D8625665E00635977

Getting Started with Your PC/104-GPIB and the NI-488.2 Software for DOS
This manual contains instructions to help you install and configure the National Instruments PC/104-GPIB interface board and the NI-488.2 software for DOS. The interface board is intended for use in a PC/104-based system. The NI -488.2 software is intended for use with MS-DOS version 4.0 or higher Edition Date: April-1995 URL: http://digital.ni.com/manuals.nsf/websearch/E4608F95A4C56FEC8625665E00635972

Getting Started with Your AT-GPIB/TNT (PnP) and the NI-488.2 Software for Windows
This manual contains instructions to help you install and configure the National Instruments AT-GPIB/TNT (PnP) interface board, and the NI-488.2 software for Windows. The NI-488.2 software is intended for use with Windows version 3.1 or higher. This manual assumes that you are already familiar with Edition Date: March-1995 URL: http://digital.ni.com/manuals.nsf/websearch/1D82FCEE7684E56A86256DB1004C7269

Getting Started with Your AT-GPIB/TNT (PnP) and the NI-488.2 Software for DOS
This manual contains instructions to help you install and configure the National Instruments AT-GPIB/TNT (PnP) interface board, and the NI-488.2 software for DOS. The NI-488.2 software is intended for use with MS-DOS version 4.0 or higher (or equivalent). This manual assumes that you are already Edition Date: March-1995 URL: http://digital.ni.com/manuals.nsf/websearch/D9328AAFB7D1F99C86256DB1004C392F

Getting Started with Your NI-VXI Software for the VXIpc-486 Model 200/500 Series and Windows
This manual contains instructions for installing and configuring the NI-VXI bus interface software forÊthe VXIpc-486 and Windows. The NI-VXI software works with all models of the Model 200 Series and the Model 500 Series of the National Instruments VXIpc-486 embedded computers. Edition Date: March-1995 URL: http://digital.ni.com/manuals.nsf/websearch/8E86B55423C345F18625665E006359CD

Getting Started with Your Plug and Play AT Serial Board for Windows
This manual contains instructions to help you install and configure the National Instruments Plug and Play AT serial interface board and the NI serial driver software for Windows. The board is intended for use in personal computers equipped with 16-bit ISA slots. The NI serial driver software is Edition Date: March-1995 URL: http://digital.ni.com/manuals.nsf/websearch/AA9A725BF7D6B71C8625665F0050136A

Getting Started with Your GPIB-ENET and the NI-488.2M Software for OSF/1 and Specifications
This manual contains instructions for installing and configuring the National Instruments GPIB-ENET and NI-488.2M multitasking software driver for use with a DEC Alpha AXP workstation running the OSF/1 operating system. This manual is meant to be used with the NI -488.2M Software Reference Manual. Edition Date: February-1995 URL: http://digital.ni.com/manuals.nsf/websearch/8EC3F1A2F106AA5A8625665E006358CA

Getting Started with Your VXI-SB2020 and the NI-VXI Software for Solaris
This manual contains instructions for installing and configuring the National Instruments VXI-SB2020 interface kit and the NI-VXI software for Solaris. The VXI-SB2020 kit contains separate software distribution disks for the Solaris 1.x and 2.x platforms. Any differences between the two platforms Edition Date: February-1995 URL: http://digital.ni.com/manuals.nsf/websearch/4BCD4CAA0E3922518625665E00635A10

Getting Started with Your GPIB-232CT-A and the NI-488.2 Software for Macintosh
This manual contains instructions for installing and configuring the National Instruments GPIB-232CT-A RS-232-to-GPIB Controller and NI-488.2 software for Macintosh. This manual is meant to be used with the NI-488.2 User Manual for Macintosh and the NI -488.2 Function Reference Manual for Macintosh. Edition Date: January-1995 URL: http://digital.ni.com/manuals.nsf/websearch/F3E90B3496A01E7E8625665E0063590B

Getting Started with Your GPIB-ENET and the NI-488.2 Software for Windows and Specifications
This manual contains instructions for installing and configuring the National Instruments GPIB-ENET and NI-488.2 software for Windows 3.1 or higher. This manual assumes that you are familiar with the Microsoft Windows operating environment and with TCP/IP networks and that your computer is Edition Date: January-1995 URL: http://digital.ni.com/manuals.nsf/websearch/F17645E42CEDFFA98625665E00635A1F