Getting Started with PCMCIA-GPIB and NI-488.2 Software for Windows (Japanese)
This manual contains instructions for installing and configuring the National Instruments PCMCIA-GPIB card and the NI-488.2 software for Windows. The PCMCIA-GPIB card is intended for use on computers with a Type II PCMCIA socket. The NI-488.2 software is intended for use with Microsoft Windows Edition Date: September-1995 URL: http://digital.ni.com/manuals.nsf/websearch/D4E69B3C0073111286256DAC00603EE0

Getting Started with Your GPIB-SCSI-A and the NI-488M Software for Silicon Graphics Challenge Servers Running IRIX 5.x/6.x and Specifications
This manual contains instructions for installing and configuring the National Instruments GPIB-SCSI-A Controller and NI-488M software for use with Silicon Graphics Challenge servers running IRIX 5.x/6.x. This manual is meant to be used with the NI-488M Software Reference Manual. Edition Date: September-1995 URL: http://digital.ni.com/manuals.nsf/websearch/681223CC9AA8E2058625665E006358CC

Getting Started with Your NI-VXI Software for the VXIpc-486 Model 500 Series and LynxOS
This manual contains instructions for installing and configuring the NI-VXI bus interface software for the VXIpc-486 and LynxOS. The NI-VXI software works with all models of the Model 500 Series of the National Instruments VXIpc-486 embedded computers. Edition Date: September-1995 URL: http://digital.ni.com/manuals.nsf/websearch/AD79B0B9F0731BF88625665E006359D1

Getting Started with Your PCMCIA-GPIB and NI-488.2 Software for DOS (Japanese)
This manual contains instructions for installing and configuring the National Instruments PCMCIA-GPIB card or PCMCIA-GPIB+ and the NI-488.2 software for DOS. The PCMCIA-GPIB card is intended for use on computers with a Type II PCMCIA socket. The NI-488.2 software is intended for use with MS-DOS Edition Date: September-1995 URL: http://digital.ni.com/manuals.nsf/websearch/F72ED1C3D76A5DAB86256DAC0060BEF4

Getting Started with Your MC-GPIB and the NI-488M Software for the IBM RISC System/6000 and Specifications
This manual contains instructions for installing and configuring the National Instruments MC-GPIB interface board and the NI-488M multitasking software driver for use with the IBM AIX Operating System. This package is intended for use on an IBM RISC System/6000 workstation. This manual is meant to Edition Date: June-1995 URL: http://digital.ni.com/manuals.nsf/websearch/F5B782EC5D58488E8625665F0058DA4A

Getting Started with Your PCI-GPIB and the NI-488.2 Software for Macintosh
This manual contains instructions for installing and configuring the National Instruments PCI-GPIB interface board and the NI-488.2 software for Macintosh. This manual is meant to be used with the NI-488.2 User Manual for Macintosh and the NI-488.2 Function Reference Manual for Macintosh. This Edition Date: June-1995 URL: http://digital.ni.com/manuals.nsf/websearch/B34B629F590D1EE58625665F005835E9

Getting Started with Your AT-GPIB/TNT and the NI-488.2 Software for DOS
This manual contains instructions to help you install and configure the National Instruments AT-GPIB/TNT or AT-GPIB interface board and the NI-488.2 software for DOS. The NI-488.2 software is intended for use with MS-DOS version 4.0 or higher (or equivalent). This manual uses the term AT-GPIB/TNT Edition Date: April-1995 URL: http://digital.ni.com/manuals.nsf/websearch/E69D89E1D69FB31386256DB10051A68B

Getting Started with Your AT-GPIB/TNT and the NI-488.2 Software for Windows
This manual contains instructions to help you install and configure the National Instruments AT-GPIB/TNT or AT-GPIB interface board and the NI-488.2 software for Windows. The interface board is intended for use in personal computers equipped with 16-bit ISA slots. The NI-488.2 software is intended Edition Date: April-1995 URL: http://digital.ni.com/manuals.nsf/websearch/58C6B71DADB720DE86256DB10053FD87

Getting Started with Your EISA-GPIB and the NI-488.2 Software for DOS
This manual contains instructions for installing and configuring the National Instruments EISA-GPIB interface board and the NI-488.2 software for DOS. The interface board is intended for use in personal computers equipped with EISA bus slots. The NI-488.2 software is intended for use with MS-DOS Edition Date: April-1995 URL: http://digital.ni.com/manuals.nsf/websearch/4D0CF0421541A4F08625665E0063598B

Getting Started with Your EISA-GPIB and the NI-488.2 Software for Windows
This manual contains instructions for installing and configuring the National Instruments EISA-GPIB interface board and the NI-488.2 software for Windows. The interface board is intended for use in personal computers equipped with EISA bus slots. The NI-488.2 software is intended for use with Edition Date: April-1995 URL: http://digital.ni.com/manuals.nsf/websearch/6E6FE2DDDAF2092E8625665E00635A02