Getting Started with Your GPIB-PCIIB and the NI-488 Software for MS-DOS
This manual contains instructions for installing and configuring the National Instruments GPIB-PCIIB board and the NI-488 software. This package is intended for use on IBM PC AT, PC/XT, and compatible computers. This manual is meant to be used with the NI-488 MS-DOS Software Reference Manual. Edition Date: June-1994 URL: http://digital.ni.com/manuals.nsf/websearch/8ECE0CFAB6147B448625665E00635983

Getting Started with Your GPIB-SCSI-A and the NI-488.2M Software for the Sun SPARCstation and Specifications
This manual contains instructions for installing and configuring the National Instruments GPIB-SCSI-A and NI-488.2M multitasking software for use with the Sun SPARCstation running under SunOS 4.1 or higher operating system. This manual is meant to be used with the NI-488.2M Software Reference Edition Date: June-1994 URL: http://digital.ni.com/manuals.nsf/websearch/D19160BEBF91BB338625665E006358BA

Getting Started with Your SB-GPIB/TNT and the NI-488.2M Software for Solaris 2
This manual contains instructions for installing and configuring the National Instruments SB-GPIB/TNT or SB-GPIB interface board and NI-488.2M software. The GPIB hardware and NI-488.2M software should be used with a Sun SPARCstation workstation with SBus slots running Solaris 2.1 or higher. This Edition Date: June-1994 URL: http://digital.ni.com/manuals.nsf/websearch/68B1089CA2C47EF38625665E006358BD

Getting Started with Your TC-GPIB (or Digital's IET11) and the NI-488.2M Software for OSF/1 and Specifications
This manual contains instructions for installing and configuring the National Instruments TC-GPIB interface board and the NI-488.2M multitasking software for use with a DEC Alpha AXP workstation running the OSF/1 operating system. This manual is meant to be used with the NI-488.2M Software Edition Date: May-1994 URL: http://digital.ni.com/manuals.nsf/websearch/958BF000167014058625665E006358C4

Getting Started with Your EXM-GPIB and the NI-488.2 Software for DOS
This manual contains instructions for installing and configuring the National Instruments EXM-GPIB interface board and the NI-488.2 software for MS-DOS. The hardware is intended for use on RadiSys embedded PC systems, including VME, VXI, or EMC systems equipped with 16-bit EXM slots. The software Edition Date: April-1994 URL: http://digital.ni.com/manuals.nsf/websearch/DFCE00F215A70EAE86256DB0006EB79B

Getting Started with Your EXM-GPIB and the NI-488.2 Software for Windows and Specifications
This manual contains instructions for installing and configuring the National Instruments EXM-GPIB interface board and the NI-488.2 software for Windows. The hardware is intended for use on RadiSys embedded PC systems, including VME, VXI, or EMC systems equipped with 16-bit EXM slots. The software Edition Date: April-1994 URL: http://digital.ni.com/manuals.nsf/websearch/AB86C3C98C2083E386256DB0006F095A

Getting Started with Your VME-SB2020 and the NI-VXI Software for Solaris
This manual contains instructions for installing and configuring the National Instruments VME-SB2020 interface kit and the NI-VXI software for Solaris. The VME-SB2020 kit contains separate software distribution disks for the Solaris 1.x and 2.x platforms. Any differences between the two platforms Edition Date: February-1994 URL: http://digital.ni.com/manuals.nsf/websearch/8FCEDB966EAA89298625665E00635A0A

Getting Started with Your MC-GPIB and the NI-488.2 Software for DOS
This manual contains instructions for installing and configuring the National Instruments MC-GPIB interface board and the NI-488.2 software for DOS. The interface board is intended for use in personal computers equipped with 16-bit Micro Channel slots. The NI-488.2 software is intended for use with Edition Date: January-1994 URL: http://digital.ni.com/manuals.nsf/websearch/14EB5E30DE80301086256DAC00647762

Getting Started with Your MC-GPIB and the NI-488.2 Software for Windows
This manual contains instructions for installing and configuring the National Instruments MC-GPIB interface board and the NI-488.2 software for Windows. The interface board is intended for use in personal computers equipped with 16-bit Micro Channel slots. The NI-488.2 software is intended for use Edition Date: January-1994 URL: http://digital.ni.com/manuals.nsf/websearch/6EE9389183AD626C86256DAC00683E24

Getting Started with Your Model 200 Series VXIpc-486 and the NI-VXI Software for MS-DOS and Specifications
This manual contains instructions for installing and configuring the National Instruments VXIpc-486 Model 200 Series embedded computer and the NI-VXI bus interface software for MS-DOS. The Model 200 Series consists of the Model 200 and Model 240 VXIpc-486 embedded computers. Edition Date: January-1994 URL: http://digital.ni.com/manuals.nsf/websearch/4B3A24A3B3BA916986256660005903DA