68-Pin Mating Connector and Shell Installation Guide
This guide describes how to assemble the 68-pin mating connector and shell. Edition Date: October-1993 URL: http://digital.ni.com/manuals.nsf/websearch/36E0BAB89FBEA1128625665E00635A26

AT-GPIB and NI-488M for SCO UNIX System V/386
This manual contains instructions for installing and configuring the National Instruments AT-GPIB interface board and NI-488 multitasking software (NI-488M) driver for use with the SCO UNIX System V/386 Release 3.2.2 (or higher) or Open Desktop Release 1.0 (or higher) Operating System. This Edition Date: October-1993 URL: http://digital.ni.com/manuals.nsf/websearch/4AF69E62B8E338D5862566600078111D

CB-50 Connector Block Installation Guide
This guide describes how to connect your data acquisition board and the CB-50 I/O connector block to your computer. Edition Date: October-1993 URL: http://digital.ni.com/manuals.nsf/websearch/165253E6B60147898625665E00612255

GPIB11 VMS Software Reference Manual
The GPIB11 VMS Software Reference Manual describes the National Instruments GPIB11 software for the VMS operating system. This manual contains instructions for configuring and installing the GPIB11 software, and describes how to use the supplied high-level and low-level driver routines to Edition Date: October-1993 URL: http://digital.ni.com/manuals.nsf/websearch/38610760B62CE74F8625665E00635892

Getting Started with Your VXI-AT2000 and the NI-VXI Software for MS-DOS
This manual contains instructions for installing and configuring the National Instruments VXI-AT2000 interface kit. This manual is meant to be used with the NI-VXI Software Reference Manual for C (part number 320307-01), the NI-VXI Software Reference Manual for BASIC (part number 320328-01), and Edition Date: October-1993 URL: http://digital.ni.com/manuals.nsf/websearch/588581D7861BE15186256721005D10D2

Getting Started with Your VXI-NB2040 and the NI-VXI Software for Macintosh
This manual contains instructions for installing and configuring the National Instruments VXI-NB2040 interface kit. This manual is meant to be used with the NI-VXI Software Reference Manual for C (part number 320307-01) and the NI-VXI Text Utilities Reference Manual (part number 320321-01). Edition Date: October-1993 URL: http://digital.ni.com/manuals.nsf/websearch/85377287FAA2A4AD8625665E0060FD91

Installation Guide for Dual Rack-Mount Kit for GPIB-100A, 110, and 120A
This guide describes how to install the rack-mount hardware for two GPIB-100A or GPIB-110 bus extenders, or two GPIB-120A bus expanders. Edition Date: October-1993 URL: http://digital.ni.com/manuals.nsf/websearch/0799AB241AFB90C18625665F00617CC7

NAT4882 Programmer Reference Manual
The NAT4882 is an application-specific integrated circuit developed by National Instruments. The NAT4882 is an IEEE 488.2 Controller chip designed to perform all the interface functions defined in the IEEE 488.1-1987 standard and the additional requirements of the IEEE 488.2-1987 standard. The Edition Date: October-1993 URL: http://digital.ni.com/manuals.nsf/websearch/41D0A5F228AB54988625665E006359CB

NI-VXI Text Utilities Reference Manual
This manual describes in detail the interactive text utilities for the NI-VXI software. Edition Date: October-1993 URL: http://digital.ni.com/manuals.nsf/websearch/2128344D27363E598625665F006727FF

R6850 Cable Assembly Installation Guide
This guide describes how to use the R6850 cable assembly to connect a plug-in board with a 68-pin I/O connector, such as the AT-MIO-16X, to a 50-pin accessory. Edition Date: October-1993 URL: http://digital.ni.com/manuals.nsf/websearch/8BE2A943FAA59F728625665E00635A21