AT-DSP2200 User Manual
This manual describes the electrical and mechanical aspects of the AT-DSP2200 and contains information concerning its operation and programming. The AT-DSP2200 is a high-resolution, audio frequency range, analog input/output, and digital signal processing (DSP) board. The AT-DSP2200 is a member of Edition Date: December-1993 URL: http://digital.ni.com/manuals.nsf/websearch/EFE5B683035DFCCA86256728007F5CCF

CB-100 I/O Connector Block Installation Guide
This installation guide describes how to connect the CB-100 I/O connector block to your data acquisition board. Edition Date: December-1993 URL: http://digital.ni.com/manuals.nsf/websearch/4741384FDF4553E08625665E00635A8D

GPIB-CT IBCL Reference Manual
This manual describes the National Instruments IBCL (Interface Bus Control Language) operating system for the GPIB-232CT, GPIB-422CT, and GPIB-232CT-A interface products. This manual describes the built-in IBCL commands and outlines techniques for adding new ones to the system. Edition Date: December-1993 URL: http://digital.ni.com/manuals.nsf/websearch/A7F2E32A3B12315F8625665E00687944

GPIB-VXI/CP Software Reference Manual
This manual contains information you will need to develop Code Instruments, which are custom software modules that run directly on the GPIB-VXI/C. This manual assumes that you are familiar with the VXIbus specification, as well as 68000 Assembly and C programming languages. Edition Date: December-1993 URL: http://digital.ni.com/manuals.nsf/websearch/913FE04C3FD6383D8625665F005DE24E

Getting Started with Your GPIB-1014 Series Board and the NI-488M Software for Themis and Specifications
This manual contains instructions for installing and configuring your National Instruments GPIB-1014 series interface board and NI-488M software for use with the Themis Sparc 2LC running SunOS 4.1.2 or higher. For specific information about the GPIB-1014, GPIB-1014D, GPIB-1014DP, or GPIB-1014P Edition Date: December-1993 URL: http://digital.ni.com/manuals.nsf/websearch/E22C1C144D135B4F8625669F006E1ACE

Getting Started with Your Model 500 Series VXIpc-486 and the NI-VXI Software for MS-DOS and Specifications
This manual contains instructions for installing and configuring the National Instruments VXIpc-486 Model 500 Series embedded computer and the NI-VXI bus interface software for MS-DOS. The Model 500 Series consists of the Model 500 and Model 566 VXIpc-486 embedded computers. Edition Date: December-1993 URL: http://digital.ni.com/manuals.nsf/websearch/4B39205C4E92659C86256660005A62F8

NI-DSP Software Reference Manual for LabVIEW for Windows
The NI-DSP Software Reference Manual for LabVIEW for Windows explains how to use the NI-DSP software package for the LabVIEW for Windows environment. The NI-DSP software package contains the NI-DSP Analysis VIs, which are high-level digital signal processing (DSP) VIs that call the functions that Edition Date: December-1993 URL: http://digital.ni.com/manuals.nsf/websearch/E15B328AB9DAAE388625674600701291

TNT4882 Evaluation Board Installation Guide and Specification
This manual contains instructions to help you install and configure the National Instruments TNT4882 evaluation board. The TNT4882 evaluation board is intended for use in an ISA (PC AT) or compatible computer by developers of programmable instrumentation who are integrating the TNT4882 ASIC into Edition Date: December-1993 URL: http://digital.ni.com/manuals.nsf/websearch/076F30F6965C2B5786256DB00074CC1C

Universal Language Interface Using HP-Style Calls
This manual is intended for use with the NI-488 MS-DOS Software Reference Manual (part number 320135-01) or the NI-488.2 Software Reference Manual for MS-DOS (part number 320282-01). This manual contains information for programming the NI-488 driver using the Universal Language Interface (ULI) Edition Date: December-1993 URL: http://digital.ni.com/manuals.nsf/websearch/06E8D2604E6F6EE586256DB0006A15B8

GPIB Device Simulator EPROM Programming Manual
You can simulate the operation of a GPIB instrument by replacing the EPROM inside a GPIB-232CT with the GPIB Device Simulator EPROM (part number 702295-01). The GPIB-232CT will then act as a GPIB instrument. Edition Date: November-1993 URL: http://digital.ni.com/manuals.nsf/websearch/E4AA37F55990C6AF8625665F00613218