Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

What Is the Slew Rate For an NI-9216 Analog Output Module? What is the slew rate for the NI-9264 analog output module? The slew rate is listed in the NI-9263 manual, but no value is given in the NI-9264 manual. URL: http://digital.ni.com/public.nsf/allkb/A6F2C77B82D064CE862575EB007A5DD5

NI-9476 Digital Output Channel Cycles Off and On I have my NI-9476 (Sourcing Digital Output Module) connected to a device such as solenoids, motors, actuators, relays or lamps. When I write a true value to my digital output, the channel toggles off and on for a couple of seconds before reaching state. URL: http://digital.ni.com/public.nsf/allkb/7955858520931C6A862575DE00381DCA

Usando Compact DAQ con el DAQ Signal Accessory Estoy tratando de utilizar el curso DAQ & Signal Conditioning con el hardware CompactDAQ. Las instrucciones hacen referencia a conectar el Compact DAQ al DAQ Signal Accessory. El DAQ Signal Accessory es alimentado con un cable de 68 pines y muchas de las señales referenciadas están internamente URL: http://digital.ni.com/public.nsf/allkb/112C225FB1752608862575DD005C4C77

Using CompaqDAQ with DAQ Signal Accessory I'm trying to use the DAQ & Signal Conditioning course with a CompactDAQ setup. The instructions reference connecting the CompaqDAQ to a DAQ Signal Accessory. A DAQ Signal Accessory is powered by a 68-pin cable and many of the signals referenced are internally wired and are only connected through URL: http://digital.ni.com/public.nsf/allkb/604034BBA16FFFA7862575CA006232CE

NI 9219 Reads Zero Volts at 60 Hz I am trying to read a 60 Hz signal from my NI 9219 but it is only reading zero volts. Why is this happening? URL: http://digital.ni.com/public.nsf/allkb/53104A2E0B6A7133862575A8007E5437

How to Read the Internal Auto Zero Channel of an NI 9211A I would like to check what the internal auto zero channel is reading on my NI 9211A. How can I accomplish this? URL: http://digital.ni.com/public.nsf/allkb/F3B03160D4E3AB64862575A500793B36

RJ50 Cable Color Code I have a NI 9237 module and a RJ50 Cable with 10-pin modular plug to pigtail wires. How do I determine which pin of the 9237 corresponds to which color of the RJ50 cable? URL: http://digital.ni.com/public.nsf/allkb/8F79CBBF294D609986257594004E6DFA

How Does Setting DAQmx Wait Mode Property to Sleep Work? What is the behavior of the DAQmx Read Wait Mode Property when I set it to sleep? Specifically, my CPU usage seems higher than expected while I am waiting for the desired number of samples during DAQmx Read. URL: http://digital.ni.com/public.nsf/allkb/3F7E72BD075796BB8625758D006F4226

如何设置DAQmx等待模式为睡眠工作？ 当我将DAQmx读取等待模式的属性设为睡眠模式时，它是如何工作的呢？尤其是DAQmx读取过程中，在等待期望数量的采样点时，我的CPU使用率似乎比预期的要高。 URL: http://digital.ni.com/public.nsf/allkb/EAD12B8CEA0B18A0862575AE0035FBD7

Can I Access the Counter Output Signal with the NI 9481/9485? The manual shows that the NI 9481/9485 modules have two counter outputs. Why am I not able to see a pulse train signal generated when I use these counter outputs? URL: http://digital.ni.com/public.nsf/allkb/606CC81173F909888625758600756B6F