PXI-6682 Compatibility with Real-Time Systems
I installed a PXI-6682 in a PXI chassis with a Real-Time embedded controller. I followed the instructions in the user manual and placed the module in slot 2 of the PXI chassis, but the PXI-6682 does not show up in Measurement & Automation Explorer (MAX). Is the PXI-6682 supported in LabVIEW
URL: http://digital.ni.com/public.nsf/allkb/B0277D3B5F5677BE862573EE0080CAD6
|
1588 Synchronization Drifts Away with Time when using a 10 Mbps Router with the PXI-6682
I'm doing 1588 synchronization with the PXI-6682 but I've noticed that synchronization gets worse with time (the slave continues to drift away from the master). Looking at the "offset from master" property for the slave, the value will look normal (under 100ns) most of the time, but you'll
URL: http://digital.ni.com/public.nsf/allkb/06F98C12AA16ACA68625737000629003
|
Special Considerations for PFI0 on the PXI-6682
PFI0 seems to behave inconsistently. Sometimes I get an immediate timestamp even if my input hasn't changed. The same problem happens if I connect PFI0 to a destination, the initial state seems to be floating. Do I have a problem with PFI0?
URL: http://digital.ni.com/public.nsf/allkb/25CDB06E89A649B3862573700062BE1A
|
Error -1074118646 When Initializing Synchronization Card
I'm running a program that uses the 6653 Synchronization card, but when I run the program, it stops during the initialization VI, and sends the error -1074118646.
URL: http://digital.ni.com/public.nsf/allkb/94A061471960BC0D862572F20069A410
|
Error 1074118646 When Initializing Synchronization Card
I'm running a program that tries to use the 6653 Synchronization card, but when I run the program, it stops during the initialization VI, and throws the error 1074118646.
URL: http://digital.ni.com/public.nsf/allkb/3A77E1FC11D63802862572F20069A4DF
|
NI的PXI板卡如何同PXI背板映射？
我有一个NI的PXI板卡。我想知道这块板卡能否驱动或者读取Star Trigger，能否使用PXI触发线，能否使用10MHz的背板时钟，或者能否使用本地总线。
URL: http://digital.ni.com/public.nsf/allkb/07F96392B16454E3482572C700324329
|
PXI-823x或PCI-8232(千兆以太网)模块应该使用哪种线缆？
NI Home This Document is not yet Rated Rate this Document PXI-823x或PCI-8232(千兆以太网)模块应该使用哪种线缆？ 硬件: GPIB>>Plug-in Controllers>>PCI-8232, GPIB>>Plug-in Controllers>>PXI-8232, Instrument Connectivity Other>>Ethernet>>PXI-8231, GPIB>>Plug-in Controllers>>PCI-8232, GPIB>>Plug-in Controllers>>PXI-8232,
URL: http://digital.ni.com/public.nsf/allkb/004EFF3B9DC8187C48257227000A4F52
|
将客户定制的FPGA代码下载到PXI-6653的FPGA上，与原有的FPGA代码并存
我想将客户定制的FPGA代码下载到PXI-6653上，这样做会覆盖PXI-6653上原有的代码么？我想通过客户定制的FPGA代码来访问PXI-6653上不同的PFI线。
URL: http://digital.ni.com/public.nsf/allkb/2F56392A1EB7B6A44825721E002A607C
|
How Do National Instruments PXI Boards Map to the PXI Backplane?
I have a PXI National Instruments board. I want to know if my board can drive or read the Star Trigger, the PXI Trigger Lines, the 10MHz Backplane Clock, or the Local Bus.
URL: http://digital.ni.com/public.nsf/allkb/F4AD3B87DC8CD62E862571E3007042E5
|
Troubleshooting Tips for GigE Vision Cameras
Where can I find troubleshooting tips as well as general information on GigE Vision cameras?
URL: http://digital.ni.com/public.nsf/allkb/9B44E123EFBAB226862571E30066891C
|
