Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

What is the maximum serial baud rate for embedded PXI controllers? What is the maximum baud rate for the built in RS-232 port on my embedded PXI controller? URL: http://digital.ni.com/public.nsf/allkb/01E1586616FD650886257440006E44EB

Current Output for PXI-8196 and PXI-8186 USB Ports What is the current output on the USB ports on the PXI-8186 / PXI-8196 controller? Also is this independent or shared current on the USB bus? URL: http://digital.ni.com/public.nsf/allkb/78A309AB80B791F886257434003DD593

Why Can't I Boot My Real-Time Controller From a USB Key? I am trying to boot my desktop PC or PXI controller from a real-time (RT) USB utility drive that I created in Measurement and Automation Explorer. I set the controller to boot from USB by changing the boot order in the BIOS, but it is still not working. Why is my controller not detecting the URL: http://digital.ni.com/public.nsf/allkb/9F71984BF5D7DCF68625742E0072797E

What is the Correct File Path Format for LabVIEW Real-Time Targets? I am trying to save a file on my real-time target and need to know what directory to specify for saving the file. What directory do I save the file on to make sure it is saved on the real-time target? URL: http://digital.ni.com/public.nsf/allkb/BBCAD1AB08F1B6BB8625741F0082C2AF

Can I Make My PXIe-8130 Into a Dual-Boot Controller? I would like to set up my PXIe-8130 controller so that it can boot into Windows and LabVIEW Real-Time. Is this possible? URL: http://digital.ni.com/public.nsf/allkb/BB744858794373CA8625741A00786FC5

How do I install Reliance on my RT PC or PXI Target? Reliance is a file system developed specifically for embedded systems. It is used in real-time systems where there cannot be a chance that data could be lost due to file system corruption. In order for Reliance to be used, support for Reliance must be offered by the Real-Time Operating URL: http://digital.ni.com/public.nsf/allkb/8289ED02D027784A86257413005B5F69

MAX Crashes after Rebooting a RT PXI-8104 with Several Devices that Support TEDS Measurement and Automation Explorer (MAX) crashes when rebooting a connected Real-Time (RT) controller that has TEDs devices installed. URL: http://digital.ni.com/public.nsf/allkb/97BAAADF2481903B862573F300786DD0

PXIe-8130 Not Detected in MAX after Rebooting from Windows into LabVIEW Real-Time When using a PXIe-8130 as a Dual-Boot controller (configured to boot into Microsoft Windows or LabVIEW Real-Time on the same controller) the ethernet controller may not work properly in LabVIEW Real-Time in certain situations. When rebooting the controller into LabVIEW Real-Time after URL: http://digital.ni.com/public.nsf/allkb/3D85116D402A41D0862573CA006F88AF

How to Modify the NI 8352/8353 Rack-Mount Kit to Fit Racks Less Than 26” Deep The location I have for my rack-mount controller is smaller than 26" deep. How do I adjust the 8352/8353 rack-mount kit for this? URL: http://digital.ni.com/public.nsf/allkb/AA1D583D8CD67053862573B00072CFCE

512 MB Compact Flash Product Notification FAQ Information on the 512 MB Compact Flash Product NotificationOnly the following products shipped between December 1, 2006 and September 10, 2007 are affected: cRIO-9004 cFP-2020 - Only with 512 MB Compact Flash cards in the URL: http://digital.ni.com/public.nsf/allkb/C64D8FF78DADB84E862573600071F65D