Reenumerar el Chasis PXI No Actualiza el Número de Mi Chasis en Mis Dispositivos RIO
Estoy utilizando algunos dispositivos de la Serie R en mi chasis PXI. Sin embargo, cuando reenumero mi chasis utilizando Measurement & Automation Explorer (MAX) y hago clic en mi dispositivo RIO que está en el chasis, el número del chasis no cambia. ¿Por qué es esto, y cómo puedo cambiarlo?
URL: http://digital.ni.com/public.nsf/allkb/6BF5B4F1D01A0C3A862575DE005B3ED1
|
Renumbering PXI Chassis Does not Update My Chassis Number in My RIO Devices
I am using some R-Series devices in my PXI chassis. However, when I renumber my chassis using Measurement & Automation Explorer (MAX) and click on my RIO device that is in that chassis, the chassis number does not change. Why is this, and how can I change it?
URL: http://digital.ni.com/public.nsf/allkb/3F16C8047A91C641862575DA0058D945
|
Mode for MXI-4 Fiber-Optic Cables
What is the mode for the MXI-4 fiber-optic cables? Is it single-mode or multi-mode?
URL: http://digital.ni.com/public.nsf/allkb/95237D322C789902862575CC005C49E3
|
Will the Format Disk Option in MAX Format All Partitions on My Dual Boot PXI Controller?
I have a dual boot PXI controller and I currently have it running LabVIEW Real-Time. If I right click on the target in Measurement and Automation Explorer (MAX), will it format all partitions on my controller or just the RT partition?
URL: http://digital.ni.com/public.nsf/allkb/BFF5A61E445A0E34862575C8005FBE90
|
What Signal Speeds Do My PXI Chassis Trigger Lines Support?
What signal speeds do the PXI Trigger and PXI Star Trigger lines on the back plane of a PXI Chassis support? A diagram of the PXI Chassis back plane is shown below:
URL: http://digital.ni.com/public.nsf/allkb/892204272FF2C0BE862575C500636AF6
|
HDD-8263のHDDを交換してもファイルが読み取れますでしょうか
NI HDD-8263 ＲＡＩＤ構成のＨＤＤを使用してデータを保存しています。 本体は装置に組み込んであるため、データを外部に取り出す際に、HDDだけ抜き出してもう一つのHDD-8263に入れてファイルの読み出しを行いたいのですが、そのような使用方法は可能でしょうか。 また、HDD-8263を認識させているコントローラが変わっても大丈夫でしょうか。
URL: http://digital.ni.com/public.nsf/allkb/CE7153CD39A7369D862575B7002528DA
|
PXI-8108 or PXI-8110 and Third Party Hardware Issues
My PXI-8108 or PXI-8110 is showing communication issues with third party hardware. I'm seeing at least one of the following symptons: Certain registers are inaccessible causing certain features to be unavailable Some PXI modules fail to show up The controller fails to boot when specific boards or
URL: http://digital.ni.com/public.nsf/allkb/632E0B3276063537862575B300645C5C
|
Issues With Using PXI-8108/8110 With Third-Party PXI Devices
I'm seeing one of the following or similar issues with my PXI-8108/8110 and third-party PXI card: My third-party card is not recognized in either Windows or a Real-Time OS, I’m having troubles communicating with my third-party card My PXI Controller won’t POST when powered. Why am I seeing this
URL: http://digital.ni.com/public.nsf/allkb/59A4DDFC697D9AEB862575B00071F72A
|
PXI-8231 Doesn't Show Up in MAX for Windows or Real-Time OS
I have a PXI-8231 or PXI-8234 installed on my PXI chassis. When I boot into Windows or Real-Time (RT) and look in Measurement & Automation Explorer(MAX), I cannot find the device listed under My System or Remote Systems in Devices and Interfaces. Although when Windows boots it does recognize the
URL: http://digital.ni.com/public.nsf/allkb/32A7090D133DA44F862575A9004D92D4
|
How Do I Externally Export a Clock Using NI-Sync?
I am trying to export a clock from my Timing & Synchronization Board to be used by other devices which are not in my chassis, but my clock is not recognized by these devices. How do I successfully distribute a clock?;
URL: http://digital.ni.com/public.nsf/allkb/94ED1967B4C53C1C862575A5006CA1E2
|
