Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

为什么1000DC SCXI 机箱电源灯在闪烁? 我有一个SCXI 1000 DC机箱，里面装了4个模块，一直工作的很好。今天电源灯突然开始闪烁，它表示什么意思呢？发生什么事情了呢？ URL: http://digital.ni.com/public.nsf/allkb/FAD50A868CC6A51B482572A1001FC437

Can I Use the 9944 and 9945 Bridge Completion Accessories With the SCXI-1314T? I have a 9944 or 9945 bridge completion accessory and would like to use it with my SCXI-1314T TEDS Terminal Block. URL: http://digital.ni.com/public.nsf/allkb/925F415C8BCE5B5F8625729C00736AB8

The USB-1359 and Windows Vista 64 When I plug a USB-1359 into my Windows Vista 64 machine, a message pops up asking for the device's drivers. The operating system recognizes the device by name and asks for driver software for the NI-USB 1359. Can I use this device even though the readme does not list support for Vista URL: http://digital.ni.com/public.nsf/allkb/551569CAEE3A34488625729C00760E52

Which Strain Gauge Modules Support Custom Shunt Calibration Values? National Instruments' strain gauge module 1521x has a Shunt Resistance of 100kΩ, is there anyway of changing this value? URL: http://digital.ni.com/public.nsf/allkb/6B1B3E8A2A484351862572900035F807

Multichannel SCXI Convert Clock Default Rate Change in NI-DAQmx 8.5 How does NI-DAQmx choose the convert clock rate for a multichannel SCXI acquisition? URL: http://digital.ni.com/public.nsf/allkb/1BF39CC271CA7A9D8625728E0061EF95

Where Can I Find The Warranty For My NI Hardware? I'm trying to find the warranty information for my NI hardware. Where can I find it? URL: http://digital.ni.com/public.nsf/allkb/8341879DC763DF5886257289005D816E

Tabla de Precisión de Termopares por Tipo y Temperatura Estoy leyendo la temperatura utilizando dos termopares del mismo tipo pero las lecturas son diferentes. He calculado la precisión de mi hardware de medida pero no compensa la diferencia en las lecturas. ¿Cuál puede ser la causa de este fenómeno? URL: http://digital.ni.com/public.nsf/allkb/79632A4CAD11B68086257410006D5746

Thermocouple Accuracy Table by Type and Temperature I am reading the temperature of a chamber using two thermocouple of the same type but the readings are different. I have calculated the accuracy of my measurement hardware but it does not compensate for the difference in readings. What may be causing this phenomenon? URL: http://digital.ni.com/public.nsf/allkb/776AB03E065228408625727B00034E20

Error-200576 with SCXI-1102 and SCXI-1308 In Measurement and Automation Explorer (MAX), I am getting Error-200576 when I select Built-in as the CJC source in my temperature task. I am using SCXI-1102 module with SCXI-1308 as the terminal block. Why am I receiving this error? URL: http://digital.ni.com/public.nsf/allkb/6CF94E0346BF27AD862572790061172D

Why Do I Get Error -200077 When Trying to Configure My SCXI-1120/D? I have a SCXI-1120/D connected to an M-Series card. When I try to acquire data in a Measurement & Automation Explorer (MAX) Test Panel, I receive the following error: Error -200077 occurred at Test Panel Possible Reason(s): Requested value is not a supported URL: http://digital.ni.com/public.nsf/allkb/1EC380B82065EAC0862572730075415D