Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Why Are My SCXI Modules Recognized As Incorrect Devices in my Daisy-Chained System? I am using a multi-chassis SCXI system and some modules in one chassis in slots that are also filled in other chassis are recognized as unrelated modules of different types. Why is this? URL: http://digital.ni.com/public.nsf/allkb/90165525C229394D86257015007F8CF9

デイジーチェーンで構成されているシステムでは、SCXI-モジュールが違うデバイスとして認識されているのはなぜでしょうか。 マルチシャーシSCXIシステムでは各シャーシの同じスロットに同じモジュールが挿入された場合、無関係の別のモジュールとして認識されます。これはなぜでしょうか。 URL: http://digital.ni.com/public.nsf/allkb/1DEE9E0E6E47E153862571230049767F

What Does 'Standby' Mean on a PXI Chassis Power Switch? The power switch of my PXI chassis has two selections, 'ON' and 'Standby'. What does 'Standby' mean? URL: http://digital.ni.com/public.nsf/allkb/61E2B5B4467887AB86256FF50077D050

SCXI Chassis Need to Have Different Addresses Even when Controlled by Different Controllers nbspI have two executables using NI-SWITCH that initialize different switch modules in two different SCXI chassis. They are controlled with different MIO boards. I get an error when trying to run the 2 executables together, stating that there is already an open driver session to the switch. URL: http://digital.ni.com/public.nsf/allkb/627B7C5C5101C9A586256FD60083B106

Resolving the 'Unable to Test Chassis at This Time' Error When I try to test my SCXI system, I get the error message, 'Unable to test chassis at this time.' What could be the cause for this error and how can I resolve it? URL: http://digital.ni.com/public.nsf/allkb/ACFA07282FDC306186256FBA00799C72

Why Is the 1000DC SCXI Chassis Power Light Blinking On and Off? I've had the SCXI 1000 DC chassis working fine for awhile now with my 4 modules in tact. Suddenly today the power light began blinking on and off. Is this indicative of anything? What is going on? URL: http://digital.ni.com/public.nsf/allkb/5F59C1AB209FEF3E86256F8D006BB252

Why Does Measurement & Automation Explorer (MAX) Freeze When I Try to Auto-Detect My SCXI Modules Using Traditional DAQ? I go under Devices and Interfaces and right-click on Traditional DAQ Devices and Add an SCXI Chassis. I then follow the prompts selecting the Chassis Type, Chassis ID, and Chassis Address, but when I select Yes to Auto-Detect Modules Measurement & Automation Explorer (MAX) freezes. URL: http://digital.ni.com/public.nsf/allkb/0FA44B20777D77C186256F8700011D65

NI PXI-1052 Chassis Identification in MAX with Traditional NI-DAQ When I right-click in Measurement & Automation Explorer (MAX) to install my PXI-1052 chassis through Traditional NI-DAQ (Legacy), I don't see an option to select PXI-1052. How do I add and configure my PXI-1052 chassis in MAX using Traditional NI-DAQ? URL: http://digital.ni.com/public.nsf/allkb/81B7608E8D82652886256F50006E1E01

I cannot Identify my PXI Chassis as a PXI-1052 with Traditional NI-DAQ in MAX. I cannot identify my PXI chassis as a PXI-1052 with Traditional NI-DAQ in MAX. URL: http://digital.ni.com/public.nsf/allkb/86FF1F3A5EE85E6386256F4E0004ACCA

SCXI-1349アダプタから接続可能なオスの50ピンコネクタはDAQボードのどのラインを使用できますか。 SCXI-1349アダプタから接続可能なオスの50ピンコネクタはDAQボードのどのラインを使用できますか。SCXIシャーシとDAQボードが通信の際行うハンドシェイクのためデジタルラインは使用不可でしょうか。 URL: http://digital.ni.com/public.nsf/allkb/A59F0BD1B9AF60208625702E0040F97F