Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

温度測定器をSCC-RTD01を使用して作成できますか。 SCC-RTD01を使用して、サーミスターで温度測定装置を作ることはできますか。 URL: http://digital.ni.com/public.nsf/allkb/7EDEE80F444491CC86256EBB0028F7CF

Can I Use The SCC-AIxx Family For Thermocouple Measurements? I want to use the SC-2345 for more than eight channels of thermocouple readings, but the SCC-TC modules are limited to only eight per carrier. Can I use the SCC-AIxx modules (which have two channel inputs) to access channels eight through fifteen for thermocouple measurements? URL: http://digital.ni.com/public.nsf/allkb/FD0E976C579778D586256C3E005273C2

SCC 모듈중 어떠한 모듈이 Cascaded 혹은 Dual stage mode를 제공합니까? 저는 2개의 SCC 모듈을 이용하여 입력 신호를 컨디셔닝 하고 싶습니다. 어떤 모듈이 Dual stage mode를 제공합니까? URL: http://digital.ni.com/public.nsf/allkb/F47A1F5B6860726C86256CD4002E8F8E

Which SCC Modules Can Be Cascaded or Used in Dual Stage Mode? I want to perform two types of signal conditioning on my incoming signal and therefore want to cascade two SCC modules. What modules support a dual stage mode? URL: http://digital.ni.com/public.nsf/allkb/7B801B3C9E0B82A386256C25007640CA

Which SCC Modules Can Be Cascaded or Used in Dual Stage Mode? I want to perform two types of signal conditioning on my incoming signal and therefore want to cascade two SCC modules. What modules support a dual stage mode? URL: http://digital.ni.com/public.nsf/allkb/34E477CC7C41F698862571AE0067F8D1

どのSCCモジュールがカスケード接続に利用できますか？ またどのSCCモジュールがデュアルステージモードで使用できますか？ 増幅とフィルタ等といった２種類の信号調節を行いたいたいのでSCCモジュールをカスケード接続する必要がありますが、どのSCCモジュールがデュアルステージモードで使用できますか？ URL: http://digital.ni.com/public.nsf/allkb/D81C2D1EB974DA6486256E3E003CDB38

Using Thermocouple Panelettes with Non- J or K Type Thermocouples I would like to use panelettes with my SC-2345, SC-2350, or CA-1000 to connect to my thermcouple, but it is not a J or K type thermocouple. Is there an option for other thermocouple types? URL: http://digital.ni.com/public.nsf/allkb/8AB22D8F21084FCB86256BBC005887DA

Why Can't I Control a Specific Digital Line from the Internal Screw Terminal Block Inside My SC-2345? I am trying to apply a digital signal to a pin at the screw terminal block inside my SC-2345. I can't seem to change the state of this pin with my digital signal. I am able to control all of the others lines with the same signal. What could be wrong? URL: http://digital.ni.com/public.nsf/allkb/DD156D0FA2C2804886256B260083B797

SCC Module을 사용하기 위하여 SC-2345를 사용할 때 grounding mode는 어떤것을 선택해야 합니까? 저는 NI data acquisition device와 SC-2345 carrier를 사용하고 있습니다. 저는 다음 중 어떤 측정 mode를 사용해야 합니까: differential (DIFF), referenced single ended (RSE), or non-referenced single ended (NRSE)? URL: http://digital.ni.com/public.nsf/allkb/E3A7399F63B3E60386256EA5001082FB

What Grounding Mode Should I Select When Using the SC-2345 Carrier for SCC Modules? I am going to use an SC-2345 carrier with my NI data acquisition device. What measurement mode should I select: differential (DIFF), referenced single ended (RSE), or non-referenced single ended (NRSE)? URL: http://digital.ni.com/public.nsf/allkb/A838F826A32752E786256B1200646776