Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Can I Connect a Quadrature Encoder to an M Series Card Using the SCC-FT01? I am trying to connect an encoder with UP/DOWN control to my M Series card using an SCC-FT01 feedthrough module. The SCC-FT01 User Guide says that UP/DOWN controls are tied to the P0.6 and P0.7 lines for E-Series use. However, my M-Series card uses different pins. Can I use this URL: http://digital.ni.com/public.nsf/allkb/10F258E034638B17862570380063E635

How Do I Control the SCC-RLY01 with My DAQ Board? I have an SC-2345 carrier with a SCC-RLY01 installed in one of the DIO slots. How do I open and close the relay? URL: http://digital.ni.com/public.nsf/allkb/54267CD3C238301D862570380076AAB8

How Do the Module Slots on the SC-2345 Map to the Channels on the DAQ Cards? Whenever I configure my SC-2345 and add the SCC modules to the slots, the channel number that appears right next to the module doesn't match to the channel numbers appearing when configuring a Task for them. What are all these channel numbers and why are they different? URL: http://digital.ni.com/public.nsf/allkb/1D49E47CB61CE52486256F95001A740A

How Do I Program a DAQmx TEDS Task in LabVIEW? I know how to set up DAQmx tasks and global channels in Measurement and Automation Explorer (MAX) to use my TEDS-enabled sensors, but I want to do it programmatically in LabVIEW. Is there any way to set-up my TEDS DAQmx channels directly in LabVIEW? URL: http://digital.ni.com/public.nsf/allkb/CE93FAB3AA03809686256F7A004AB8B0

SC-2345에 M시리즈 카드의 32채널을 사용하기. 두대의 SC-2345와 제 M시리즈 카드의 32채널 모두를 사용하고 싶은데요, 가능하나요? URL: http://digital.ni.com/public.nsf/allkb/D8281AB0A3D14A8786256FF700086811

Using 32 Channels Of An M-Series Card With SC-2345 I would like to use all 32 channels of my M-Series card with two SC-2345s. Is that possible? URL: http://digital.ni.com/public.nsf/allkb/AA05978D645C968886256F530075C481

Why Am I Getting Noisy Measurements with My SC-2345 Signal Conditioning Modules? I have an SC-2345 box with one or more signal conditioning modules. I am able to read from the modules, but I get inconsistent or noisy readings. Shouldn't the signal conditioning take care of the noise for me? URL: http://digital.ni.com/public.nsf/allkb/4F00A0167643CC2F86256F39004EDD06

Which DIO lines are Reserved for Communication on a TEDS SC-2350 Carrier? When using TEDS class II sensors which DIO lines are available for use and which ones are reserved? URL: http://digital.ni.com/public.nsf/allkb/D3E1C1FBBF2E265F86256F1C006BC405

MAX에서 Traditional DAQ로 SC-2345를 어떻게 설정할 수 있습니까? MAX에서 Traditional DAQ로 SC-2345를 어떻게 설정할 수 있습니까? URL: http://digital.ni.com/public.nsf/allkb/68ACDB1D07936B8E86256F110059DBE7

SC-2345を従来型NI-DAQとしてMeasurement & Automation Explorer (MAX)で認識させる方法 従来型NI-DAQを使用したいのですが、Measurement & Automation Explorer (MAX)でどのようにSC-2345を認識させることができますか？ URL: http://digital.ni.com/public.nsf/allkb/8BF0D70C0525A4ED86256F50002D65C1