Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

'Not Responding to Base Address' Error in MAX when Running Traditional DAQ Test Panel with PCI-DIO-32Hs Board Connected to SSR Backplane. I have a PCI-DIO-32HS connected to a SSR backplane. When I open a Traditional NI-DAQ driver test panel in MAX, it gives me a 'Not Responding to Base Address' error. URL: http://digital.ni.com/public.nsf/allkb/DD63499842CCE47486257243000F8C46

SC-2050 아답터를 SSR8 빽플레인에 연결하려면 어떤 케이블로 연결해야 합니까? 저는 SC-2050 아답터와 SSR8 빽플레인을 가지고 있습니다. SC-2050 메뉴얼에서 J5 컨넥터로 SSR8 빽플레인에 연결할수 있다고 나와있는데 어떤케이블로 이 장비들을 연결할수 있습니까? 또한, SC-2050의 26핀 DIO컨넥터가 50핀 SSR8 빽플레인 컨넥터로 연결되는 핀맵핑이 어떻게 URL: http://digital.ni.com/public.nsf/allkb/40EAD94E879EB1538625704C00017733

What cable connects my SC-2050 adapter to my SSR8 backplane? I have an SC-2050 adapter and an SSR8 backplane, and the manual for the SC-2050 says that connector J5 can connect to an SSR8 backplane, but what cable connects these devices? Also, what is the pin mapping from the 26-pin DIO connector on the SC-2050 to the 50-pin SSR8 backplane connector? URL: http://digital.ni.com/public.nsf/allkb/358D7CAE42108D70862570150061B813

What Are Flyback Diodes and Why Are They Used? I have an output SSR module and I was told that I need to use flyback diodes to protect the system. What are these diodes and why are they used? URL: http://digital.ni.com/public.nsf/allkb/336D3653F6B6387386256F36005BE09F

Accessories in Traditional NI-DAQ and NI-DAQmx NI Home 3 ratings: 4.33 out of 5 Rate this Document Accessories in Traditional NI-DAQ and NI-DAQmx Hardware: Multifunction DAQ (MIOConnector Blocks>>BNC-2080, Multifunction DAQ (MIOConnector Blocks>>BNC-2090, Multifunction DAQ (MIOConnector Blocks>>BNC-2110, Multifunction DAQ (MIOConnector URL: http://digital.ni.com/public.nsf/allkb/B50A1CA411D90EAD86256F1E0065FDC0

传统的NI-DAQ和NI-DAQmx可以使用的附件 传统的NI-DAQ和NI-DAQmx驱动支持哪些DAQ附件？ URL: http://digital.ni.com/public.nsf/allkb/47ED1176DCD817F98625738800262362

Which Cables or Accessories Do I Need to Connect a DAQ Device to an SSR Backplane? There are several DAQ and DIO devices which can be connected to an SSR Backplane (Digital Signal Conditiong Backplane). Which devices are compatible, and which cables or accessories do I need to make the connection? URL: http://digital.ni.com/public.nsf/allkb/5325E710371BED4486256D4900463AC1

Can I Use an E Series DAQ Board to Drive an SSR Relay Module? Can I use an E Series data acquisition (DAQ) board to drive an SSR relay module? URL: http://digital.ni.com/public.nsf/allkb/28B88568C1A77EBB86256F1C00617DEB

我可以使用E系列DAQ卡片去驅動一個 SSR 繼電器模組嗎？ 我可以使用E系列DAQ資料擷取卡片去驅動一個 SSR 繼電器模組嗎？ URL: http://digital.ni.com/public.nsf/allkb/645557544DC1E17586256D9F0038E8FC

How Do the SSR Output Modules Work? I am trying to assemble a system involving power supplies, SSR backplanes, solenoids, strain gage transducers, thermocouples, and a counter. I am somewhat concerned about the voltages involved. URL: http://digital.ni.com/public.nsf/allkb/E37E4CD11942C4288625693F005D0FB4