Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

SC-2050 아답터를 SSR8 빽플레인에 연결하려면 어떤 케이블로 연결해야 합니까? 저는 SC-2050 아답터와 SSR8 빽플레인을 가지고 있습니다. SC-2050 메뉴얼에서 J5 컨넥터로 SSR8 빽플레인에 연결할수 있다고 나와있는데 어떤케이블로 이 장비들을 연결할수 있습니까? 또한, SC-2050의 26핀 DIO컨넥터가 50핀 SSR8 빽플레인 컨넥터로 연결되는 핀맵핑이 어떻게 URL: http://digital.ni.com/public.nsf/allkb/40EAD94E879EB1538625704C00017733

What cable connects my SC-2050 adapter to my SSR8 backplane? I have an SC-2050 adapter and an SSR8 backplane, and the manual for the SC-2050 says that connector J5 can connect to an SSR8 backplane, but what cable connects these devices? Also, what is the pin mapping from the 26-pin DIO connector on the SC-2050 to the 50-pin SSR8 backplane connector? URL: http://digital.ni.com/public.nsf/allkb/358D7CAE42108D70862570150061B813

Accessories in Traditional NI-DAQ and NI-DAQmx NI Home 3 ratings: 4.33 out of 5 Rate this Document Accessories in Traditional NI-DAQ and NI-DAQmx Hardware: Multifunction DAQ (MIOConnector Blocks>>BNC-2080, Multifunction DAQ (MIOConnector Blocks>>BNC-2090, Multifunction DAQ (MIOConnector Blocks>>BNC-2110, Multifunction DAQ (MIOConnector URL: http://digital.ni.com/public.nsf/allkb/B50A1CA411D90EAD86256F1E0065FDC0

传统的NI-DAQ和NI-DAQmx可以使用的附件 传统的NI-DAQ和NI-DAQmx驱动支持哪些DAQ附件？ URL: http://digital.ni.com/public.nsf/allkb/47ED1176DCD817F98625738800262362

When Do I Use the NB9 Cable and What is its Pinout? I am using at data acquisition (DAQ) device and would like to connect the analog signals to a 5B module and the rest of the signals to a CB-50. Can I do this? URL: http://digital.ni.com/public.nsf/allkb/862567530005F09C86256483004CC631