Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Configuring SC-2311 in MAX Problem: How can I configure my SC-2311 in MAX? Solution: If you want to configure SC-2311 using MAX you should be able to do it under Traditional NI-DAQ Devices. 1. Right click on the device under Traditional NI-DAQ Devices and go to Properties. 2. You will have a configuration window pop up 3. URL: http://digital.ni.com/public.nsf/allkb/CD1E01FA5FF7385586256F0F0059EE56

Does National Instruments Support the 5B-02 Backplane for Use with its Data Acquisition (DAQ) Hardware? I have a 5B-02 backplane and 5B modules. Does National Instruments support using it with my DAQ system? URL: http://digital.ni.com/public.nsf/allkb/0CC9AB7049231BB8C1256C6400752276

What is the Difference Between the 5B-01 and 5B-02 Backplanes? What is the basic difference between the 5B-01 and 5B-02 backplanes and why does NI support one and not the other with NI DAQ boards? URL: http://digital.ni.com/public.nsf/allkb/B92F5ECB338569F986256C53006EF274

Why Are All My Analog Input Signals Reading Almost Zero Volts, But Not Floating? I have connected all of my analog inputs to my analog input 5B modules. I have cabled everything to my analog input board. When I take readings, they are not floating, but they are all stuck at approximately zero, though they may change slightly as the input voltage changes.What is wrong? URL: http://digital.ni.com/public.nsf/allkb/0959EF2F354A241186256C30005FDBE0

Determining the Channel Number of a 5B Module How do I determine the data acquisition (DAQ) channel number for each slot on my 5B backplane? URL: http://digital.ni.com/public.nsf/allkb/0F1872302CD4E9A486256BA3007692AA

Can I Use the 5B37 Thermocouple Module with the DAQ Channel Wizard? Problem: Can I Use the 5B37 Thermocouple Module with the DAQ Channel Wizard? Solution: Because the 5B37 has a voltage nonlinearity, it cannot be used with the DAQ channel wizard. URL: http://digital.ni.com/public.nsf/allkb/24CEFB238FB571F286256B9C005C109A

我可以把 5B37 Thermocouple Module 和 DAQ Channel Wizard 一起用嗎? 問題: 我可以把 5B37 Thermocouple Module 和 DAQ Channel Wizard 一起用嗎? 解答: 由於 5B37 是非線性的, 您不能和 DAQ Channel Wizard 一起用. 您可以用 5B37 Linearization Library (連結在下面) 來轉換電壓成線性溫度以在 LabVIEW 中使用. URL: http://digital.ni.com/public.nsf/allkb/CF5380CCB189FA0186256F9A004350E5

How Do I Verify the Voltage Level Given to My Analog Output Channel on the 5B Backplane? I am having trouble reading the correct voltage with my 5B analog output module. How can I verify the voltage being delivered to the backplane without having the analog output module attached? URL: http://digital.ni.com/public.nsf/allkb/C1D6B455F43CFFD386256AF8005BD3A9

5B41 모듈의 10 kHz Bandwidth 는 어떤 의미인가요? 문제점: 5B41 모듈의 10 kHz Bandwidth 는 어떤 의미인가요? 솔루션: Bandwidth 는 신호에서 감쇄 없이 얻을 수 있는 주파수의 범위(이 경우에는 DC 부터 10 kHz 까지)를 의미합니다. URL: http://digital.ni.com/public.nsf/allkb/30C860733997BCC186256F390016978D

What Does the 10 kHz Bandwidth of the 5B41 Module Mean? Problem: What Does the 10 kHz Bandwidth of the 5B41 Module Mean? Solution: Bandwidth refers to the frequency range (DC to 10 kHz in your case) of signals that are acquired without attenuation. Therefore, the 5B41 Module has a low pass filter which removes any frequencies above 10 kHz. URL: http://digital.ni.com/public.nsf/allkb/BB505C808CD231E1862569A4005A4D17