Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

如何使用NI的产品测量电流？ 我想进行电流测量，但是我不知道哪种NI产品可以测量电流并且如何测量？ URL: http://digital.ni.com/public.nsf/allkb/D84290C812ED19164825726700401FB7

5B41模块的10kHz带宽是什么意思？ NI Home This Document is not yet Rated Rate this Document 5B41模块的10kHz带宽是什么意思？ 硬件: Signal Conditioning Other>>5B Series 问题: 5B41模块的10kHz带宽是什么意思？ 解答: 带宽是指被采集信号无衰减的频率范围（您说的情况的频率范围是从DC到10kHz）。5B41模块有一个截止频率为10kHz的低通滤波器，可以把10kHz以上的信号滤掉。 相关链接: 5B Series User Manual 附件: 报告日期: 10/06/2006 最近更新: 10/09/2006 URL: http://digital.ni.com/public.nsf/allkb/151D9E2DD19DA504482571FF00129C1C

Why Does My SC-2311 Have All of Its Sockets Filled With a White Substance? My new SC-2311 carrier has all of its pin holes filled with a white substance. Is this normal? URL: http://digital.ni.com/public.nsf/allkb/3DEA1E03211C15FE862570FE0069C999

5B 모듈을 M시리즈 DAQ장비와 함께 사용 할 수 있습니까? 문제점: 5B 모듈을 M시리즈 DAQ장비와 함께 사용 할 수 있습니까? 솔루션: 예, 5B08 백플레인은 M시리즈 DAQ장비와 연결될 수 있습니다.게다가 5B 모듈은 5B08에 추가될 수 있다. 다음의 악세사리가 필요합니다. URL: http://digital.ni.com/public.nsf/allkb/6024D376F0F301AD86256FF00008A262

Accessories in Traditional NI-DAQ and NI-DAQmx NI Home 3 ratings: 4.33 out of 5 Rate this Document Accessories in Traditional NI-DAQ and NI-DAQmx Hardware: Multifunction DAQ (MIOConnector Blocks>>BNC-2080, Multifunction DAQ (MIOConnector Blocks>>BNC-2090, Multifunction DAQ (MIOConnector Blocks>>BNC-2110, Multifunction DAQ (MIOConnector URL: http://digital.ni.com/public.nsf/allkb/B50A1CA411D90EAD86256F1E0065FDC0

传统的NI-DAQ和NI-DAQmx可以使用的附件 传统的NI-DAQ和NI-DAQmx驱动支持哪些DAQ附件？ URL: http://digital.ni.com/public.nsf/allkb/47ED1176DCD817F98625738800262362

Can I Use my SC-2311 with an M-Series Device? Problem: Can I use the SC-2311 with an M-series device? Solution: Yes, the SC-2311 is pin-compatible with M-series devices, and therefore can be used in DAQmx with 5B and SSR modules. You cannot add the SC-2311 as an accessory in DAQmx, but this is not a requirement for using the modules. URL: http://digital.ni.com/public.nsf/allkb/6CDB32DAFD77D4AB86256F1D004DE97F

Can I Use my SC-2311 with an M-Series Device? Problem: Can I use the SC-2311 with an M-series device? Solution: Yes, the SC-2311 is pin-compatible with M-series devices, and therefore can be used in DAQmx with 5B and SSR modules. You cannot add the SC-2311 as an accessory in DAQmx, but this is not a requirement for using the modules. URL: http://digital.ni.com/public.nsf/allkb/C022935B4593113286257116005719B6

M시리즈 보드로 SC-2311을 사용할 수 있습니까? 문제점: M시리즈 보드로 SC-2311을 사용할 수 있습니까? 솔루션: SC-2311은 현재 트레디셔널 NI-DAQ드라이버만 지원이 됩니다. M시리즈 보드는 DAQmx드라이버만 지원이 됩니다. URL: http://digital.ni.com/public.nsf/allkb/AAF25C3CAB959FBD86256F43001D9C4E

Configuring SC-2311 in MAX Problem: How can I configure my SC-2311 in MAX? Solution: If you want to configure SC-2311 using MAX you should be able to do it under Traditional NI-DAQ Devices. 1. Right click on the device under Traditional NI-DAQ Devices and go to Properties. 2. You will have a configuration window pop up 3. URL: http://digital.ni.com/public.nsf/allkb/CD1E01FA5FF7385586256F0F0059EE56