我要如何存取UMI-7774上的DPull接腳?
我有NI 733x, 734x或735x系列的運動控制器和UMI-7774連結，同時我需要去改變預設的power-up狀態。根據我所要設定的狀態，我知道我需要將DPull接腳連結至ground或者是5V，但是我找不到方法去連結UMI-7774中的這支接腳。我要如何連結呢?
URL: http://digital.ni.com/public.nsf/allkb/797586B2F89D75898625740C0007B850
|
How Can I Specify Acceleration, Velocity, and Deceleration for a Contoured Move?
How can I specify acceleration, velocity, and deceleration profiles for a contoured move when the trajectory generator on the motion controller is not used during a contoured move?
URL: http://digital.ni.com/public.nsf/allkb/F58339DBA74CF728862573760005B0B1
|
How Can I Trigger an Event Off of an Encoder Line (A, B, or Z)?
I would like to trigger an event on my 733x, 734x, or 735x motion controller card based off of an encoder line (A, B, or Z). How can I do this?
URL: http://digital.ni.com/public.nsf/allkb/70BF642F99126FC38625736F0056D7AB
|
Where can I find the Danaher P7000AC (P70360) and P7000DC (P70530) Stepper Drive Manuals?
Where can I find the Danaher P7000AC (P70360) and P7000DC (P70530) Stepper Drive Manuals?
URL: http://digital.ni.com/public.nsf/allkb/FEB445A71B94412A86257345004DC76C
|
Ghosting on Motion Controller Analog Inputs
I have an NI-73xx Motion controller and I am using the analog input to read an analog signal. I have hooked up my signal to analog input channel 3, but in my program I am reading from analog input 1. Even though I am reading from a different channel than what I have connected, I still see
URL: http://digital.ni.com/public.nsf/allkb/9CDFFA9DB8A876A48625733C0012796E
|
Will Electronic Gearing Work with an Axis that is Performing Contour Moves?
I plan to electronically gear two motion axes together, and perform contour moves with the master axis. Will this work?
URL: http://digital.ni.com/public.nsf/allkb/629442FB7D32074D862573310050C955
|
National Instruments Motion Controller Boards & Drivers
I have a National Instruments Motion Controller board but I am unsure if I should use ValueMotion, FlexMotion or NI-Motion. Which one should I use and why?
URL: http://digital.ni.com/public.nsf/allkb/782E7400A9FE22A68625731C005C973A
|
National Instruments 运动控制板卡和驱动
我有一块NI的运动控制卡，但是我不确定它使用ValueMotion, FlexMotion 或者 NI-Motion，我如何选择以及为什么？
URL: http://digital.ni.com/public.nsf/allkb/30A48EFA7F13D20C862574000017F026
|
Determining the Step Length and Control Loop Update Period for Servo Tune
I have a NI 7330/7340/7350 motion controller. I am using it to control a servo motor, but I am having trouble tuning it in the Servo Tune tab in the Measurement & Automation Exploxer (MAX). In the Servo Tune's Step Response tab, what is the appropriate value for Step Length? Also, in the
URL: http://digital.ni.com/public.nsf/allkb/98DE5BEB4A379A4B8625730D007258AC
|
A Simple Method for Servo Motor Tuning
I can't seem to get my servo motor tuned. Is there a simple method to find PID gains that will be give me something close to my desired response?
URL: http://digital.ni.com/public.nsf/allkb/806F6F0B775FAF32862572FA0052F2AB
|
