Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

MID-7602/7604에 6라인 단극 스텦퍼 모터를 연결할 수 있습니까? 저는 단극 모터를 MID-760x를 이용하여 구동하고자 합니다. 매뉴얼에는 5라인 단극 스텦퍼 모터를 사용할 수 없다고 하는데, 제가 사용하고자 하는 것은 4상(6라인) 단극 스텦퍼 모터입니다. MID-760x를 이용할 수 있나요? URL: http://digital.ni.com/public.nsf/allkb/ADA7CBE09176247586256D5D0004E29A

我能使用6線式單極性步進馬達於MID-7602/7604上嗎? 我有一單極性步進馬達,欲使用MID-760X驅動.使用手冊上提到我無法使用5線式單極步進馬達,但我的馬達為四相(六線)單極性馬達,我能用於MID-760X嗎? URL: http://digital.ni.com/public.nsf/allkb/3D94C643814A13F086256D5D00150517

What is the Significance of 2.7 sec. for the Peak Current Value in the MID-7652/54 User Manual? MID-7652/54 User Manual lists the following under Servo Amplifier specifications on page 31:Peak current limit (2.7 s)........................ 1.7-10 A (default 1.7 A)What does 2.7 s exactly mean? URL: http://digital.ni.com/public.nsf/allkb/138C56F190C2111586256D0E006939A3

Why Is My Motion Controller Not Controlling My Motor? I have the settings correct in Measurement & Automation Explorer (MAX), and I am using the interactive settings in MAX to control the motor, but the motor is not moving. What could be the cause of this behavior? URL: http://digital.ni.com/public.nsf/allkb/5455D943E243BCA586256C73000C77F5

What Switching Scheme Do the MID-7652/54 Servo Drives Use for Motor Control? What Switching Scheme Do the MID-7652/54 Servo Drives Use for Motor Control? URL: http://digital.ni.com/public.nsf/allkb/718711E174D3941C86256C7100678D32

모터제어를 위해 사용되는 MID-7652/54 서보 드라이버에서 스위칭 설계는 무엇입니까? 모터제어를 위해 사용되는 MID-7652/54 서보 드라이버에서 스위칭 설계는 무엇입니까? URL: http://digital.ni.com/public.nsf/allkb/B293A8DB7A4ED5FE86256E9A000BF46F

Voltage Rating of a Servo Motor or Actuator The MID servo drive has an output voltage of 48 V, however my servo actuator is only rated for 12 V. Can I use my actuator with the MID? URL: http://digital.ni.com/public.nsf/allkb/34D743B9569D718986256C6F00783F91

How Do I Wire a Vexta 2-Phase Stepper Motor to the MID-7602/4 Motor Drives I have a Vexta Motor from Oriental Motors that has 6 wires coming from it: red, white, blue, black, yellow, and green in color. How do I connect these wires to the Motor Power terminal of the MID 7604/2? URL: http://digital.ni.com/public.nsf/allkb/6C55312B6F61C1D686256C6200730BBD

Will National Instruments Servo Drives Operate in Four Quadrant Mode? Using the drive in this manner will eventually damage the drive. Related Links: What is Four Quadrant Control? URL: http://digital.ni.com/public.nsf/allkb/BACAA44CAA66FB4A86256C410081C09E

How Do I Change The Peak Current Per Phase On My nuDrive? I want to change the peak current per phase output value of my nuDrive. I do not see any switches or other method for changing the current setting on the outside of the nuDrive. How can I change it? URL: http://digital.ni.com/public.nsf/allkb/63B96295FC5A2CE486256C2B0047F80D