Incorrect PID Update Rate Error (-70108) with NI 7340 and NI 7350 Controllers in MAX
I correctly set the PID rates in Measurement Automation Explorer (MAX) to valid values (as described in the NI 7340 and NI 7350 hardware manuals and the 'Enable Axes' VI/function help). When I try to initialize my controller from MAX, I receive error -70108
URL: http://digital.ni.com/public.nsf/allkb/C0C521CD425A253B862574400069237A
|
Using the Up/Down Counter of M-Series cards with the DAQ Signal Accessory
I am trying to use the quadrature encoder that is built into the DAQ Signal Accessory to complete the exercises in the Data Acquisition and Signal Conditioning
URL: http://digital.ni.com/public.nsf/allkb/B764E65F4CF03B168625741E00765951
|
PCI-7390のコネクタ上のピン番号
PCI-7390を使って、モーターwコントロールしようとしています。ケーブルと端子台を自作しようとしていますが、コネクタのピン番号が分かりません。マニュアルに、ピンアサインは出ていますがｌ、1番ピン、または、51番ピンがコネクタのどちら側なのか
URL: http://digital.ni.com/public.nsf/allkb/C8426ED3753248B88625738B001DEA08
|
How Do I Access the DPull Pin on My UMI-7774?
I have a NI 733x, 734x, or 735x Motion Controller connected the the UMI-7774, and I need to change the default power-up state. I know that I need to either connect the DPull pin to ground or to 5V, depending on the state that I want to set, but I do not see any way to access that pin from
URL: http://digital.ni.com/public.nsf/allkb/DFD48E6863AD245A86257378007F1708
|
UMI-7774を使用してDPULLピンにアクセスすることはできますか
NI 733Ｘ， 734Ｘ， 735Ｘシリーズのモーションボードに、UMI-7774を接続していますが、ボードのデフォルトの起動時状態を変更する必要があります。起動時状態を設定するには、DPULLピンをセットしたい状態によって、グラウンドまた５Vに接続する必要がある
URL: http://digital.ni.com/public.nsf/allkb/C27008789FEB424586257386003408B3
|
我要如何存取UMI-7774上的DPull接腳?
我有NI 733x, 734x或735x系列的運動控制器和UMI-7774連結，同時我需要去改變預設的power-up狀態。根據我所要設定的狀態，我知道我需要將DPull接腳連結至ground或者是5V，但是我找不到方法去連結UMI-7774中的這支接腳。我要如何連結呢?
URL: http://digital.ni.com/public.nsf/allkb/797586B2F89D75898625740C0007B850
|
How Can I Specify Acceleration, Velocity, and Deceleration for a Contoured Move?
How can I specify acceleration, velocity, and deceleration profiles for a contoured move when the trajectory generator on the motion controller is not used during a contoured move?
URL: http://digital.ni.com/public.nsf/allkb/F58339DBA74CF728862573760005B0B1
|
How Can I Trigger an Event Off of an Encoder Line (A, B, or Z)?
I would like to trigger an event on my 733x, 734x, or 735x motion controller card based off of an encoder line (A, B, or Z). How can I do this?
URL: http://digital.ni.com/public.nsf/allkb/70BF642F99126FC38625736F0056D7AB
|
Ghosting on Motion Controller Analog Inputs
I have an NI-73xx Motion controller and I am using the analog input to read an analog signal. I have hooked up my signal to analog input channel 3, but in my program I am reading from analog input 1. Even though I am reading from a different channel than what I have connected, I still see
URL: http://digital.ni.com/public.nsf/allkb/9CDFFA9DB8A876A48625733C0012796E
|
Will Electronic Gearing Work with an Axis that is Performing Contour Moves?
I plan to electronically gear two motion axes together, and perform contour moves with the master axis. Will this work?
URL: http://digital.ni.com/public.nsf/allkb/629442FB7D32074D862573310050C955
|
