Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Switching Between Calibrated Fixed-Point and Raw Integer Modes for CompactRIO I/O How can I select either calibrated fixed-point or raw integer data types for the I/O nodes of my C-Series module? URL: http://digital.ni.com/public.nsf/allkb/F4ECE2EDDA91E5A386257441005D897E

Error -200980 when using DAQmx Event with NI USB-9263 I am using the DAQmx "Every N Samples Transferred from Buffer" event with the NI USB-9263 but receive the following error message when I try to run the code: Error -200980 Possible reason(s): Measurements: DAQmx Every N URL: http://digital.ni.com/public.nsf/allkb/250113A02E07E332862574170058A928

Error -200016 con la NI USB-9263 Estoy corriendo mi NI USB-9263 a la máxima frecuencia de muestreo en todos los URL: http://digital.ni.com/public.nsf/allkb/95F76BE0E5A1619D8625747700014B7F

Error -200016 with NI USB-9263 I am running my NI USB-9263 at the maximum rate on all channels with the regeneration mode set to Do Not Allow Regeneration and writing less than 5000 points per write. I receive the error message URL: http://digital.ni.com/public.nsf/allkb/7DEB112180E3DA0E862573F3006A6DF7

Determining the Maximum Current Output for the NI 9263 Module I want to ouput more than 1 mA of current with my NI 9263 cDAQ module. Can I output more than 1 mA of current if so, what is the maximum current output for the NI 9263 module? URL: http://digital.ni.com/public.nsf/allkb/52A4C4851F148B42862573E800700DE0

如何判定NI 9263模块的最大电流输出 我想使用NI 9263 cDAQ模块输出大于1mA的电流，是否能够实现？如果可以的话，NI 9263模块的允许最大输出电流是多少？ URL: http://digital.ni.com/public.nsf/allkb/BCC554E4549F8D12862573FD000CAC29

What is the Maximum Number of Samples for Finite Analog Output on the USB-9263 ? I would like to know the maximum sample count for finite analog output on the USB-9263. URL: http://digital.ni.com/public.nsf/allkb/3BC2397A164B8723862573B4007B572C

Channel Names Cause Incorrect Analog Output on NI USB DAQ Devices When generating a voltage on the analog output of my USB devices (such as the USB-6008/9, cDAQ 9263) I notice that if the channels in my task have a numeric value at the end of the channel name, then I generate incorrect values. Why is this and how can I fix it? URL: http://digital.ni.com/public.nsf/allkb/061D00FB903F2F6586257361006C5505

Full Scale Current Output for the NI 9265 on Startup I have NI-DAQmx 8.6 installed and on startup my NI 9265 in a cDAQ chassis outputs full scale current (20mA). How can I fix this since the power up state of the card should be 0mA as written on the specification. URL: http://digital.ni.com/public.nsf/allkb/C86C74450F5B78518625735A0056C8C6

Error -200077 When Using an NI 9263 with Calibration Executive 3.2 When I attempt to calibrate an NI 9263 (cRIO/cDAQ module) with Calibration Executive 3.2, I'm presented with error -200077. URL: http://digital.ni.com/public.nsf/allkb/F979EC662795C43C862572B80081D469