Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Programmatically Setting the NI 9205 Voltage Range I want to be able to programmatically set the voltage range on each of my analog inputs on the NI 9205 independently. How do I set these ranges? URL: http://digital.ni.com/public.nsf/allkb/32C533AF9AFAF3B38625746E004A510F

Switching Between Calibrated Fixed-Point and Raw Integer Modes for CompactRIO I/O How can I select either calibrated fixed-point or raw integer data types for the I/O nodes of my C-Series module? URL: http://digital.ni.com/public.nsf/allkb/F4ECE2EDDA91E5A386257441005D897E

What Units Are Returned from C-Series Analog Modules when using Fixed-Point Data? I am using Fixed-Point Data in my FPGA project for my C-series analog modules. What units will be returned with this data? URL: http://digital.ni.com/public.nsf/allkb/C18C172029D187CA8625741600664D89

¿Cuáles son las Unidades de los Valores Provenientes de Mi Módulo de la Serie C utilizado en un cRIO? No entiendo el valor de las medidas que estoy leyendo de mi Módulo de la Serie C. URL: http://digital.ni.com/public.nsf/allkb/59F2CF49FB4A5BC28625743A00562AB6

Current vs. Voltage Characteristics for C-Series Modules with Current Limiting Architectures What input impedance should I expect when using a C-Series module with a current limiting architecture (9421, 9422 and 9423)? URL: http://digital.ni.com/public.nsf/allkb/7C8EE3C395478645862573FC00783B08

How Do I Acquire Data from More than One CompactDAQ Module in LabVIEW SignalExpress? I need to acquire data from multiple modules in my cDAQ-9172 chassis using LabVIEW SignalExpress. How do I do accomplish this? URL: http://digital.ni.com/public.nsf/allkb/7F890A8413C0544A862573F4006D4E63

Does the CompactRIO 9215 Module Have Anti-Alias Filters? We recently purchased several cRIO NI 9215 modules together with a cRIO NI 9233 module. I was looking for information on the anti-alias filters and I found that the 9215 does not have anti-alias filter and the 9233 does. Why does the cRIO-9215 module not have anti-alias filters? Which URL: http://digital.ni.com/public.nsf/allkb/2C4C52B37819F838862573E20055F037

Why Do I See Large Binary Values Coming From Coming from My Analog FPGA Reading I am seeing raw binary data that is outside of the range of my analog device. URL: http://digital.ni.com/public.nsf/allkb/7829D061AB7EF7F1862573E100702A2C

Moving CompactRIO VIs with Uncalibrated Data to FPGA Targets with Calibrated Data In versions of NI-RIO prior to 2.4, C Series Modules only return binary (uncalibrated) data, which requires the host VI to apply calibration coefficients and convert the data to engineering units in software. After installing NI-RIO 2.4 or later, the default behavior for AI/AO modules is to URL: http://digital.ni.com/public.nsf/allkb/254BBC14267D2972862573E000824912

How do I configure the Input Range of the NI 9237? The NI 9237 has an input range of 25 mV for every volt of excitation. Since this device can provide a maximum excitation voltage of 10 volts, I expect that a maximum input range of 250 mV. If I configure a task with an input range of more than 25 mV, I get error -200077: "Requested value is URL: http://digital.ni.com/public.nsf/allkb/8869E00B851A868E862573D80066A1FB