Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

How Long does the Internal Real-Time Clock Battery Last in CompactRIO Controller? Usually Real-Time controllers needs CMOS management or a battery for the internal Real-Time Clock. Since cRIO controllers have an internal battery how long does the battery last? URL: http://digital.ni.com/public.nsf/allkb/9976CA1A0092D6AC4825734600574498

Metal and Paint Materials Used in CompactRIO Components What metal and paint materials are used to build CompactRIO components? URL: http://digital.ni.com/public.nsf/allkb/8171B88F5942E90A86257346007CB77A

Using the Internal Real-Time Clock on cRIO-901x Controllers In the manual for the cRIO-901x Controllers it states the following: "The system clock of the cRIO-9012/9014 is synchronized with the internal high-precision real-time clock at startup. This synchronization provides timestamp data to the controller. You can also use the internal real-time URL: http://digital.ni.com/public.nsf/allkb/B8B6480AB0F0DFAC4825734400759C62

使用 cRIO-901x Controllers 的內建 Real-Time Clock 在 cRIO-901x Controllers 的手冊中有提到："cRIO-9012/9014 的系統時間在開機時會與內建高精確度的 real-time clock 同步。此同步的動作提供 controller 時間標籤(timestamp)的資訊。你也可以使用內建的 real-time clock 來修正系統時間的偏移"。 我該如何使用內建的 r URL: http://digital.ni.com/public.nsf/allkb/DC645BAB215C3EE3862573D3000B4232

使用cRIO-901x控制器的内部实时时钟 在cRIO-901x控制器的手册中有这样的一段话: "cRIO-9012/9014的系统时钟在启动时就和内部的高精度实时时钟同步, 这种同步机制为控制器提供时间戳.您可以使用内部的实时时钟来修订您系统时钟的偏移." (The system clock of the cRIO-9012/9014 is synchronized with the internal high- URL: http://digital.ni.com/public.nsf/allkb/AA759A1FA69A94668625735B0030AB7B

Can I Interface with Two cRIO StarFabric Controllers Using a Single PXI-8310? The PXI-8310 that is used to interface with the cRIO-9052 StarFabric controller has two channels for communication. Can I utilize both of these channels to simultaneously communicate with two 9052 controllers from a single 8310 board? URL: http://digital.ni.com/public.nsf/allkb/A733C7A87171B4B2492573400071F79A

Is there a Size Limitation for USB Devices that are Supported on cRIO-901x or cFP-2220 Controllers? I would like to know if there is a size limitation on the supported USB devices for cRIO-901x and cFP-2220 controllers? URL: http://digital.ni.com/public.nsf/allkb/6B33CE34CA6B3BBD4825733F0055E234

支援cRIO-901x控制器的USB裝置有容量大小的限制嗎? 我想要知道關於支援cRIO-901x控制器的USB裝置是否有容量大小的限制。 URL: http://digital.ni.com/public.nsf/allkb/92FA89613E42289C862573F3000F9CCA

Why do I see Spurious Returns when using multiple Wait on IRQ Nodes on VxWorks Real Time Targets? NI-RIO 2.3 with LabVIEW 8.5 supports multiple Wait on IRQ nodes in a single VI, however, I see spurious returns from the "Wait on IRQ" Method Node when using cRIO-901x Controllers. This does not occur on my cRIO-900x Controllers or any other Pharlap based Real-Time controller. Why does this URL: http://digital.ni.com/public.nsf/allkb/A868BA261986A486482573380077794D

當我在VxWorks Real Time Targets環境下使用多個Wait on IRQ節點時，為何會得到假的回傳值？ NI-RIO 2.3搭配LabVIEW 8.5的使用可以支援在單一VI中使用多個Wait on IRQ節點。然而，當我使用CRIO-901x控制器時，會從"Wait on IRQ" 節點得到假的回傳值。這個現象並不會發生在cRIO-9000x或其他Pharlap的Real-Time控制器。這個問題發生的緣由為何呢？ URL: http://digital.ni.com/public.nsf/allkb/95BC4E473B7C6313862573AD00070404