Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI
KnowledgeBase

Category(s) Selected [start over]

Hardware
: Signal Sources (AWG/FG/AO) [remove] ,
31-40 of 161
KnowledgeBase [see results below]. To refine your results, select another category.
Software
Driver Software (17)
LabVIEW Signal Express (2)
Measurement Studio (4)
Other NI Software (1)
Utility Software (4)
Hardware
Arbitrary Waveform and Function Generators (88)
Analog Output Devices (65)
Question Type
Bug Fix/ Error Message/ Error Code (17)
FAQ (27)
Install/Config (6)
Programming (44)
Specifications/ Documentation (54)
Unexpected Behavior/ Bad Reading (13)
Document Languages
English (91)
Spanish (10)
Japanese (16)
Chinese (Simplified) (21)
Chinese (Traditional) (5)
Korean (18)

Sort by:
31-40 of 161
|
Is the PCI/PXI-6723 Compatible with the BNC-2115? I have a PCI/PXI-6723 with two 68-pin connectors in the front. I see that Connector 0 can connect to a BNC-2110 becuase it has pins for digital, PFI, and counter lines, along with analog output channels 0 through 7. I see that Connector 1 has pins for analog output channels 8 through URL: http://digital.ni.com/public.nsf/allkb/9F83E6261786CFDB8625727B0020E13D
External Triggering on the PCI-5411. I have connected my external trigger to the EXT TRIG SMB connector on the front of my PCI-5411. How do I setup the external trigger in software to use that pin? URL: http://digital.ni.com/public.nsf/allkb/37A4EC7B5A32D346862572730076E873
PCI-5411的外部触发 我在PCI-5411的前面的ECT TRIG SMB接口输入了一个外部触发,我应该如何在软件中使用该接口启动外部触发 URL: http://digital.ni.com/public.nsf/allkb/AF569918BA9981E08625740B00139CAD
Why Do I Get Error -89125? When I try to access the trigger lines on my device, I get the following error.Error -89125 'Device not configured'.Why does this error occur? URL: http://digital.ni.com/public.nsf/allkb/281704A664FB80BC862572700001410E
'Device not found' or 'Invalid Output Mode' Error When Using PXI-5402 in Arbitrary Waveform or Arbitrary Sequence Mode My PXI-5402 will not allow me to use the NIFGEN Arbitrary Function Generator Express VI in LabVIEW. It reports 'Device not found'. The card works fine with the FGEN SOFT FRONT PANEL and it also works fine in LabVIEW when using frequency lists for generating various waveforms. However, examples URL: http://digital.ni.com/public.nsf/allkb/69D980AB071A1E84862572600005E475
Why Does the Frequency Oscillate in the Output of My PCI-6733? I am trying to generate a square wave of 10682 Hz with an update rate of 800 kS/s on the PCI-6733. Why does the frequency of the output signal oscillate? Why am I not getting a stable frequency output? URL: http://digital.ni.com/public.nsf/allkb/677C0219BFC9CE2886257252002CE600
我可以用一个触发信号,一次序列的方式重复触发整个任意波形序列嗎? 我希望用数字信号去触发整个任意波形序列,並且等待到下次触发信号来时再次重复整个动作。我应该用哪种触发模式? URL: http://digital.ni.com/public.nsf/allkb/32274C416BB5319B4825723E000C6956
NI-5404 頻率產生器 Duty Cycle 之解析度與準確性 當使用 NI-5404 頻率產生器產生特定 Duty Cycle 的時脈輸出時,其解析度與準確性為何? URL: http://digital.ni.com/public.nsf/allkb/332732EF826F8D5A8625735D001C4E75
Why is the amplitude of the NI 54xx's output signal twice as large as the setting in the NI-FGEN? I am using a TDS1002B oscilloscope to measure the output signal of a NI PXI-54xx. I found the measured signal was twice as large as the setting in the NI-FGEN. Why is the amplitude twice the setting and how do I correct for this? URL: http://digital.ni.com/public.nsf/allkb/E6FCA8226A164202862572110046E717
¿Por qué la Amplitud de la Señal Generada en el NI 54XX’s es el Doble de la Especificada en NI-FGEN? URL: http://digital.ni.com/public.nsf/allkb/03E92E4982439B918625747600019E47
Sort by:
31-40 of 161
|