How Do You Configure the Digital IO on S Series and 673X Devices?
I am trying to configure my DAQ device to do correlated digital output. However, when I compile my code, I receive an error very early in my code at DIG_Grp_Config which is the first NI-DAQ function I call. I have checked the parameters of this function and I am confident they are
URL: http://digital.ni.com/public.nsf/allkb/94CF90BBF64A3FCE86256E94006905EE
|
My PCI-6722 Analog Output Board Outputs 10 Volts Upon Power Up.
Why does my PCI-6722 board output 10 Volts when it powers up? I want it to output 0 volts when it powers up. I am using the NI-DAQ 7.1 driver.
URL: http://digital.ni.com/public.nsf/allkb/F175871A1BB8990186256E9400651885
|
PCI-6722 아날로그 출력 보드가 전원을 켜면 10Volts 를 내보냅니다.
왜 PCI-6722 아날로그 출력 보드가 전원을 켜면 10Volts 를 내보내나요? 전원 켤때 0 volts 를 내보내기를 원합니다. NI-DAQ 7.1 드라이버를 사용하고 있습니다.
URL: http://digital.ni.com/public.nsf/allkb/1C26A4CF576A031086256F1800180DF2
|
Can you do Both Waveform and Single Point Update at the Same Time on the Analog Outputs of a PCI-672x?
Consider I have 20 Outputs configured as Waveform Output. In this setup, is it possible to configure the remaining outputs as Single Update outputs?
URL: http://digital.ni.com/public.nsf/allkb/1B118FC2FFA9EAA286256E830047FD91
|
Why am I Receiving Error -10401 When Outputting a Voltage in a Test Panel with my AT-AO-6/10 Board?
I have an AT-AO-6/10 board installed on my computer. It shows up in both MAX and device manager. When I run a test panel in MAX, however, I receive a -10401 error. Why is this?
URL: http://digital.ni.com/public.nsf/allkb/AE786749D6E63C0286256E8E0023946E
|
Supplying an Output Greater Than 20 mA with a Current Output Device
I am using an analog output device such as NI PCI-6704 or NI 9265 that is capable of outputting current between 0.1 and 20.2 mA, according to the specifications in the User Manual. Can I send more than 20 mA from these devices?
URL: http://digital.ni.com/public.nsf/allkb/B990B1BB8C6228F286256DDA005526E0
|
BNC-2110の端子台を671xと673x型のアナログ出力デバイスと組み合わせて使用することに関して。
671xあるいは673x型のアナログ出力デバイスにBNC-2110端子台を使用したい場合、Measurement & Automation Explorer (MAX)の設定画面で、BNC-2110はアクセサリの一覧に出てきません。どうしたらよいでしょうか？
URL: http://digital.ni.com/public.nsf/allkb/5227C69E6521E7FF862570DC001F190D
|
Using the BNC-2110 with 671x and 673x Analog Output Devices
When I try to configure my 671x or 673x analog output device to use the BNC-2110 as an accessory, Measurement & Automation Explorer (MAX) does not list the BNC-2110 as an option. What should I do?
URL: http://digital.ni.com/public.nsf/allkb/5E5DFEF10C256A1A86256D7F0063CD92
|
Error 10800 and Output Regeneration with the DAQCard-6715
The DAQCard-6715 is only generating output with data from the first buffer that was written to the card. When new data is written to the buffer to be output, it is ignored. Also, the Continuous Output.vi example reports error 10800 when probing the error cluster, but the VI does not stop. Why is
URL: http://digital.ni.com/public.nsf/allkb/8DAA25834904A45186256C910070F7A8
|
PCI-6711보드를 사용할 때, 왜 -10608 에러가 발생하나요?
PCI-6711을 이용하여 두개 버퍼를 이용한 파형출력(double-buffered waveform generation)을 하려고 할 때, 데이터의 전송이 이루어지지 않는다는 -10608 에러가 나타납니다. 왜 그런가요?
URL: http://digital.ni.com/public.nsf/allkb/A3A840043934867286256FD60008B0CD
|
