Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

PCI 6703/6704 Devices Appear Under Traditional DAQ Devices But Not Under NI-DAQmx Devices in MAX I have installed both the Traditional and DAQmx drivers and I can see my PCI 6703/6704 in MAX under Traditional NI DAQ Devices, but I do not see it under DAQmx Devices. Why is this? URL: http://digital.ni.com/public.nsf/allkb/002F195619F28C458625710E0058DB0C

Register Level Programming (RLP) Support for the 67xx Boards Problem: Is there RLP support for the 67xx boards? Solution: While there is RLP support for the 671x and 673x boards, there currently isn't RLP support for the 672x boards. For documentation on RLP for the 671x and 673x boards see Related Links. Related Links: Register Map and Description (. URL: http://digital.ni.com/public.nsf/allkb/1655615634A4AB6386257091005DD913

6731 카드가 MAGMA 확장 샤시와 작동하지 않습니다. NI 6731 출력보드와 4슬롯 MAGMA 확장샤시를 가지고 있습니다. 그리고 인터페이스는 PCMCIA 입니다. 이 카드는 데스크탑에서는 잘 동작하는데 MAGMA에서는 동작을 하지 않습니다. 저희는 XP에서 Traditional NI DAQ를 사용하고 있습니다. URL: http://digital.ni.com/public.nsf/allkb/6FE3F73DA5C91F328625704300824CCC

Why is my 6731 Card not Working with my MAGMA Expansion Chassis? I have a problem with a NI PCI-6731 output card and a 4 slot MAGMA expansion chassis. The bus interface with the MAGMA chassis is PCMCIA. The NI PCI-6731 works in a desktop PCI slot fine but is non-functional in the MAGMA chassis. I am using the Traditional NI-DAQ (Legacy) driver under URL: http://digital.ni.com/public.nsf/allkb/876DE0C71B09AAEC8625703E00684589

Continuous Self-Calibration of the 670x Devices I want to do register-level programming for my 6703/6704 device. Do I have to program the continuous calibration procedure or is it done by on-board hardware? URL: http://digital.ni.com/public.nsf/allkb/16335B33178CEDF786256F31007BEBFF

Using Visual C++ to Self-Calibrate the NI PCI-6733 Problem: How can I self-calibrate my NI PCI-6733 using Microsoft Visual C++? Solution: The NI PCI-6733 is a high speed analog output board supported by Traditional NI-DAQ and DAQmx. URL: http://digital.ni.com/public.nsf/allkb/3168DA1F579B53F986256F2E00617869

My PCI-6704 Fails the Self-Test in MAX When I Attempt to Open a Test Panel When I try to open a traditional test panel in MAX v3.1 for my PCI-6704 it notifies me that my device has failed the self-test, but will proceed to open a test panel. I also have an MIO card in my system which give the same error as well. I don't notice any other odd behavior though and both seem URL: http://digital.ni.com/public.nsf/allkb/3E5773BC3F429EC886256F0A006FFCF0

Why Do I See Incorrect Output (Glitch) When Using the PCI-6723? When I use the PCI-672x, I see a glitch in the signal, even when outputting a DC signal using buffered generation. You can see this when you use a test panel to output a sine waveform with amplitude of zero. What is wrong? URL: http://digital.ni.com/public.nsf/allkb/3BB2D5D837F6C9FE86256EAC007C123B

NI 6703/6704 類比輸出卡片中，數位訊號線的pull-up 電阻阻值是多少？ NI Home This Document is not yet Rated Rate this Document NI 6703/6704 類比輸出卡片中，數位訊號線的pull-up 電阻阻值是多少？ 硬體: Signal Sources (AWG/FG/AOAnalog Output Devices>>PCI-6703, Signal Sources (AWG/FG/AOAnalog Output Devices>>PXI-6703, Signal Sources (AWG/FG/AOAnalog Output Devices>>PXI-6704, Signal Sources URL: http://digital.ni.com/public.nsf/allkb/6EB3DBD675B16B4586256EB6000E5C4A

What is the Size of the Pull-Up Resistor on the Digital Lines in the NI 6703/6704 Analog Output Devices? What is size of the pull-up resistor in the NI 6703/6704 analog output devices? URL: http://digital.ni.com/public.nsf/allkb/30441A88E843617C86256EAA006E728D