Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

PCI-7041 RT Not Found in MAX I am unable to find my PCI-7041 RT in Measurement & Automation Explorer (MAX). What could be some possible reasons for this? URL: http://digital.ni.com/public.nsf/allkb/9F8A8CE97ABF82CC8625742B0048BEDA

Why Does My Real-Time Controller with NI-RIO and NI-Sync Crash? I have a real-time controller with NI-RIO 2.3 and NI-Sync 2.0.1 installed and the controller will not boot. Why does my controller crash when booting? URL: http://digital.ni.com/public.nsf/allkb/FECB7E15D5025002862573630012F384

Can I Expand the Memory on the PCI/PXI-7030/6xxx RT Series DAQ Device? The PCI/PXI-7030/6xxx RTSeries DAQ device has 8 MB DRAM, but I would like to add more memory to the device. How much more can I add? URL: http://digital.ni.com/public.nsf/allkb/8FAA2769CA61AE2286256EE90083790D

PCI/PXI-7030/6xxx RT シリーズのDAQデバイスのメモリを拡張する方法 PCI/PXI-7030/6xxx RT シリーズのDAQデバイスは８MBのDRAMを実装していますが、さらに大きな容量のメモリにしたいと思います。拡張可能な容量は何MBですか？ URL: http://digital.ni.com/public.nsf/allkb/8AD02C51D7D03DE786256FEF00240578

Installing LabVIEW 7.1 Will Remove Support for the PCI-7030 and PXI-7030 RT Controller After upgrading to LabVIEW 7.1, my PCI-7030 or PXI-7030 shows up in the Measurement and Automation Explorer (MAX), but it is not a selectable execution target. URL: http://digital.ni.com/public.nsf/allkb/34CC54D965E2A98086256E9B005FD97F

LabVIEW7.1をインストールするとPCI-7030やPXI-7030RTコントローラが認識されなくなります。 LabVIEW7.1をインストールした際に、LabVIEW7.0をインストールした際のように、実行ターゲットの切り替えのところにハードウェアが認識されません。PCI-7030RTはMAXで認識されていて、テストにも合格するのですが、実行ターゲットで選択することが出来ません。 URL: http://digital.ni.com/public.nsf/allkb/99CB2CDD5658D69F86256F12001ACB93

Can I Run a VI On an NI PCI/PXI-7030/6xxx or NI PCI/PXI-7041/6040 Device Without LabVIEW Real-Time? I have a National Instruments PCI/PXI-7030 or 7041-based RT Series DAQ device. Can I use the DAQ daughter board portion of the device directly from LabVIEW without the LabVIEW Real-Time Module installed? URL: http://digital.ni.com/public.nsf/allkb/837AEB307143ED2586256C8E0081D857

PCI-7030/6xxx 또는 PXI-7030/6xxx 보드를 LabVIeW Real-Time없이 실행시킬 수 있습니까? 7030-based RT시리즈 DAQ 디바이스에서 DAQ보드 부분을 LabVIEW Real-Time 없이 LabVIEW에서 직접 사용할 수 있습니까? URL: http://digital.ni.com/public.nsf/allkb/6A3FD32BC948D7BB86256D1300436ED5

LabVIEW RT Fails to Download VIs to My RT Series Data Acquisition Board I am trying to download a LabVIEW VI to my Real-Time (RT) Series data acquisition (DAQ) board (i.e. PXI-7030/6030E) However, I receive several errors saying that it failed to download several of the subVIs that I used in my top-level VI. What do I do? URL: http://digital.ni.com/public.nsf/allkb/DE4F30D6F700CD7886256BD100645C1D

MAX Cannot Detect My RT Series DAQ Board I just installed my Real-Time (RT) Series data acquisition (DAQ) board in my Windows 2000 system, and now it doesn't show up in the Measurement & Automation Explorer (MAX). What is wrong? URL: http://digital.ni.com/public.nsf/allkb/E523EC20E72205F586256BB90060CB11