Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Why Am I Seeing Interference or Delays With My WLS-6193? I am seeing delays or interference on the connection to my WLS-9163. Why is this and how can I fix it? URL: http://digital.ni.com/public.nsf/allkb/D4C24AE4BB62BFA7862574F90072A4B6

Connection timed out with a WLS/ENET-9163 When I run test panels on a Wireless DAQ device I get error: "Error 50405 occured at test panel no transfer in progress becuase the transfer was aborted by the client". What does this mean? URL: http://digital.ni.com/public.nsf/allkb/ACDC4A9DDB0FEA12862574F7006DC1C6

Error -200560 on Wait Until Done with WLS/ENET-9163 If I set up my WLS/ENT 9163 to do a referenced trigger and between my Start Task and Read Data VIs, I want to use a Wait Until Done VI to wait for the measurement to complete and ensure that the specified operation is complete before I stop the task the Wait Until Done VI will throw a URL: http://digital.ni.com/public.nsf/allkb/AC50528FC262351A862574F8005ECB3C

Cannot Connect to NI WLS/ENET-9163 Devices on W2k with IE 5 I have a system with Windows 2000 and Internet Explorer 5. My NI-WLS/ENET-9163 works on other systems with a different version of Internet Explorer, but not on this one. How can I connect to my device? URL: http://digital.ni.com/public.nsf/allkb/E4104C9ADE855E36862574EC0059BCE8

WLS/ENET-9163 is Undiscoverable Over Ethernet with Static IP I have my network card configured with a static IP address and I have connected a WLS/ENET-9163 device directly to the card. I am unable to discover the sleeve through MAX and a physical reset of the device does not help. How can I discover and add the sleeve? URL: http://digital.ni.com/public.nsf/allkb/B84A142294712AC0862574EC005C528A

Why Shouldn't link local be set for both the Wired and the Wireless Configurations? I'm setting up the wired and wireless configuration for my WLS-9163, and both have been set to link local. After this set up is done if I disconnect the ethernet connection, I will get an error message like the one in figure 1, with error number -201250: URL: http://digital.ni.com/public.nsf/allkb/216B3A26FDD3C753862574B300762FFC

Security Protocols Supported by Wireless DAQ NOTE: WPA2 is also known as IEEE 802.11i NOTE: For additional information, please refer to the device manual. URL: http://digital.ni.com/public.nsf/allkb/B3A3C3978689929D862574B100489DAC