Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

Triggering An Acquisition Session of a HSDIO Device I have configured my HSDIO acquisition session to have a digital start trigger. However, I am receiving a timeout error because it is not seeing the trigger. Why? URL: http://digital.ni.com/public.nsf/allkb/CDF43A02E6BB55098625724B00797F88

觸發〈Trigger〉一個 HSDIO 裝置的擷取工作 我為我的 HSDIO 擷取工作設定了數位啟動觸發。然而系統卻沒有收到 trigger 信號而且告訴我 timeout ，為什麼會這樣？ URL: http://digital.ni.com/public.nsf/allkb/1724E313DA7D144F86257293003FC1DC

Pattern Regeneration with PCI-6534 vs. PCIe-6536/37 I have an application developed for the PCI-6534 that performs pattern regeneration by storing a digital pattern in the onboard memory. I am interested in upgrading to the PCIe-6536 or PCIe-6537, but these cards do not have much onboard memory available for pattern storage. Where are URL: http://digital.ni.com/public.nsf/allkb/9CBE51490EA197EC86257245005C5443

利用 PCI-6534 與 PCIe-6536/37 作數碼重覆產生(Pattern Regeneration)的比較。 我有一個數碼重覆產生 (Pattern Regeneration)的程式，是利用 PCI-6534 卡上的記憶體來儲存數碼。現在我想要升級成 PCI-e6536 或 PCIe-6537，但是這些卡片並沒有多少卡上內建記憶體來儲存數碼。當利用 PCIe-6536/37 來做數碼重覆產生時，這些數碼要存在哪裡？這會影響效能嗎■> URL: http://digital.ni.com/public.nsf/allkb/4DEDF0BEBA1AFC0C86257275003382D9

Can the PXI-565x be Used as a Clock for the PXI-6562? I would like to use an external clock for my NI HSDIO PXI-6562. The clock frequency is greater than the PXI-5404 can provide (105 MHz). Since the PXI-565x can generate a sine wave at the required rate, can I use this signal for the clock of my PXI-6562? URL: http://digital.ni.com/public.nsf/allkb/E081CCFDC1A1850386257243005A8DDE

'Not Responding to Base Address' Error in MAX when Running Traditional DAQ Test Panel with PCI-DIO-32Hs Board Connected to SSR Backplane. I have a PCI-DIO-32HS connected to a SSR backplane. When I open a Traditional NI-DAQ driver test panel in MAX, it gives me a 'Not Responding to Base Address' error. URL: http://digital.ni.com/public.nsf/allkb/DD63499842CCE47486257243000F8C46

Exporting the NI-HSDIO Generation Session Sample Clock If I configure my NI-HSDIO generation application to export the sample clock, why do I see this sample clock before I initiate the session? URL: http://digital.ni.com/public.nsf/allkb/AB13E3DBC0D959A38625723C00757C8D

NI-HSDIO Dynamic Generation and Acquisition Shipping Example Triggering I am developing an application based upon the NI-HSDIO shipping example Dynamic Generation and Acquisition-Source Synchronous (TClk).vi. In this example, the generation session is configured to export the Data Active Event to PFI 1 to serve as a start trigger for the acquisition URL: http://digital.ni.com/public.nsf/allkb/F6BE8B5B5588B60C8625723C006A240F

NI-HSDIO Dynamic Generation and Acquisition 範例程式 我在開發一個程式，是由 NI-HSDIO 範例程式 "Dynamic Generation and Acquisition-Souce Synchronous.vi" 修改而來，在這個範例中，負責做輸出的裝置被設定成輸出 Data Active Event 給 PFI 1 當作其他擷取裝置的 start trigger，這代表使用者必須要外部接線從 PFI 1 到 PFI 2 ，擷取裝置 URL: http://digital.ni.com/public.nsf/allkb/E917633EB4FA484D862573BB0022F688

HSDIO 设备的外部时钟 我想要为我的 HSDIO 设备使用外部时钟进行采集以及产生数据，时钟频率可能不是板载时钟的整数分频。我应该做哪些工作？ URL: http://digital.ni.com/public.nsf/allkb/D422A749BAB8940D4825721F002BFFD9