What Is the Pinout for the NI 435X?
I can find the correspondence between signal names and pin numbers for the NI 435X in Table B-1 of the NI 435x User Manual. However, I cannot find any documentation showing how the pin numbers map to the
URL: http://digital.ni.com/public.nsf/allkb/91670C44DB9EEA1C862572F300708D8D
|
用于热电偶测量的NI推荐硬件
NI Home This Document is not yet Rated Rate this Document 用于热电偶测量的NI推荐硬件 硬件: Multifunction DAQ (MIOE Series, Multifunction DAQ (MIOM Series, Multifunction DAQ (MIOPortable>>USB-9211A, SCXI>>Modules>>SCXI-1102, SCXI>>Terminal Blocks>>SCXI-1303, SCXI>>Modules>>SCXI-1112, SCXI>>Modules>>SCXI-1125,
URL: http://digital.ni.com/public.nsf/allkb/5728F1E2C606756E4825724400233160
|
哪些模块化仪器产品支持虚拟通道？
我试着在Measurement and Automation Explorer (MAX)中为一个模块化仪器创建一个Traditional Virtual Channel，traditional NI-DAQ。其中有一些可以工作，有一些则不能。所有的模块化仪器都可以被选中，但有些模块化仪器的Test Panel却不能正常使用。特别是NI 4060可以正常使用，但NI 4070■>
URL: http://digital.ni.com/public.nsf/allkb/B7A8BCEB2343F838482571C90018D7C6
|
我应该如何将SCB-68上冷端补偿和我的DAQPad-4350结合起来使用呢？
我使用SCB-68和DAQPad-4350来测量热电偶。SCB-68没有作为附件在MAX中的设备列表中出现，所以是否表示无法把一个冷端补偿传感器和热电偶通道相连呢？
URL: http://digital.ni.com/public.nsf/allkb/02A642D4966DA8384825717600242726
|
Does VI Logger Use CJC and Auto Zero When Used With the 435x Boards?
I just received a 435x board and VI Logger. I am creating traditional DAQ virtual channels to use with VI Logger but I wanted to use the cold junction compensation (CJC) channel and the auto zero channel for more accurate measurements. Can I use CJC and auto zero with VI Logger?
URL: http://digital.ni.com/public.nsf/allkb/E2F500E98704CAA48625703000605D08
|
使用NI 435x用VirtualBench-Logger只能达到最高3Hz的采样率
我正在使用VirtualBench Logger（版本2.1.1或2.5）将PCI-4350（或PCI-4351、DAQPad-4350/4351）采集到的温度数据记录到文件中。如果将板卡的连接附件配置为TC-2190或者TBX-68T将导致VirtualBench Logger只能够以每秒3个样本的速度读取温度数据。在显示Logger或者是在文本编辑器中查看数
URL: http://digital.ni.com/public.nsf/allkb/916F21DC2F9949C286257027002E3A60
|
Accessories in Traditional NI-DAQ and NI-DAQmx
NI Home 3 ratings: 4.33 out of 5 Rate this Document Accessories in Traditional NI-DAQ and NI-DAQmx Hardware: Multifunction DAQ (MIOConnector Blocks>>BNC-2080, Multifunction DAQ (MIOConnector Blocks>>BNC-2090, Multifunction DAQ (MIOConnector Blocks>>BNC-2110, Multifunction DAQ (MIOConnector
URL: http://digital.ni.com/public.nsf/allkb/B50A1CA411D90EAD86256F1E0065FDC0
|
传统的NI-DAQ和NI-DAQmx可以使用的附件
传统的NI-DAQ和NI-DAQmx驱动支持哪些DAQ附件？
URL: http://digital.ni.com/public.nsf/allkb/47ED1176DCD817F98625738800262362
|
Changing the Default Power-On State of the Digital Lines on the NI 435x
I want to change the default power-on state of the NI 435x device to be logic low. What is the input impedance of the digital lines, and how do I change the default power-on state of these digital lines?
URL: http://digital.ni.com/public.nsf/allkb/E282B90103C4849D86256ED30073EBD1
|
NI DAQPad-6020E for USB, NI USB-5102, and NI USB-4350 Failing to Respond When the PC Comes Off of Standby/Hibernate State
After the PC comes off of hibernate or standby mode, the NI DAQPad-6020E for USB, NI USB-5102, or NI USB-4350 only responds (a) if the USB cable is disconnected and reconnected or (b) if power to USB device is switched off and then back on. This problem occurs on Windows 9x, Windows XP, and Windows
URL: http://digital.ni.com/public.nsf/allkb/13CF9B3754E438F086256E98005C1308
|
