Getting a Negative Reading When Making a Resistance Measurement
I am using a DMM to measure a resistance. For the purpose of testing I had shorted all the input channels and made a resistance measurement using the DMM Soft Front Panel. I read a -12 mΩ. Why am did I get this measurement?
URL: http://digital.ni.com/public.nsf/allkb/4996ED8931FD2BCE8625731D0000D875
|
USB-4065/5132/5133/6509 Panel Mounting Template
To panel mount your USB-4065/5132/5133/6509 device, refer to the instructions in the NI Digital Multimeters Getting Started Guide, NI High-Speed Digitizers Getting Started Guide, or the NI USB-6509 User Guide and Specifications. Without scaling or resizing, print
URL: http://digital.ni.com/public.nsf/allkb/A6628FB3CEDA675A86257313005D60D5
|
NI-DMM Simulated Devices
I would like to program using the NI-DMM driver but do not yet have the hardware. How can I simulate the device so that I can test my programming?
URL: http://digital.ni.com/public.nsf/allkb/3C7A39FCA065E46D862572C900712938
|
NI-DMM 시뮬레이션 디바이스(Simulated Devices)
NI-DMM driver를 사용하여 프로그래밍을 하려고 합니다. 실제 하드웨어 없이 시뮬레이션으로 해보는 것이 가능합니까?
URL: http://digital.ni.com/public.nsf/allkb/2EABC928930B0858862572E60003F4DC
|
Can the PXI-40xx be Used to Control SCXI in a Combo Chassis?
I recently received a new NI PXI DMM and I am not able to configure the SCXI modules in my system using MAX.
URL: http://digital.ni.com/public.nsf/allkb/36014FABD44369A48625728E0071E654
|
Reading RMS Voltage on DMM's while in Waveform Mode
I am using my NI DMM in waveform mode to acquire an analog waveform and display it on my front panel. However, I would still like to show a digital display of the measured RMS voltage, much like a hand-held DMM. I tried wiring in the niDMM Read function to retrieve this value, but ended up
URL: http://digital.ni.com/public.nsf/allkb/7F5CED013933E7388625727C007EF361
|
NI DMM Error -1074118625: Volt-Hz Common Mode Limit
I am using an NI DMM, and occassionally run into the following error: "Error -1074118625: niDMM Read Waveform (waveform data).vi. The Volt-Hz common mode limit has been exceeded." What does this error mean, and what can I do to remedy it?
URL: http://digital.ni.com/public.nsf/allkb/A593DEBFD86A69C68625727900748EEC
|
用于热电偶测量的NI推荐硬件
NI Home This Document is not yet Rated Rate this Document 用于热电偶测量的NI推荐硬件 硬件: Multifunction DAQ (MIOE Series, Multifunction DAQ (MIOM Series, Multifunction DAQ (MIOPortable>>USB-9211A, SCXI>>Modules>>SCXI-1102, SCXI>>Terminal Blocks>>SCXI-1303, SCXI>>Modules>>SCXI-1112, SCXI>>Modules>>SCXI-1125,
URL: http://digital.ni.com/public.nsf/allkb/5728F1E2C606756E4825724400233160
|
WHAT DOES DIGITS OF PRECISION MEAN FOR DMMS?
I'm looking at the specifications for the DMM products and they are described as having a certain number of digits of precision. What does this mean and why are some DMMs described as having ½ of a digit?
URL: http://digital.ni.com/public.nsf/allkb/5AD7D510F95BC5AC8625738C007C20F2
|
What Does Digits of Precision Mean for DMMs?
I'm looking at the specifications for the DMM products and they are described as having a certain number of digits of precision. What does this mean and why are some DMMs described as having ½ of a digit?
URL: http://digital.ni.com/public.nsf/allkb/CFEEE7675C76637F86257243007D0A7E
|
