Category(s) Selected [start over]

KnowledgeBase [see results below]. To refine your results, select another category.

GPIB-ENET/100 Device Does Not Appear in the NI Ethernet Device Configuration Utility I have Windows XP with Service Pack 2 installed. When I run the NI Ethernet Device Configuration Utility it does not detect the GPIB-ENET/100 on my network. I have manually configured the device using its Default Hostname and can communicate with my instrument successfully, but it still can URL: http://digital.ni.com/public.nsf/allkb/6792C3335C83E7E286256F7B006F1B20

Accessing IBIC on a Mac Problem: How do I access Interface Bus Interactive Control (IBIC) on a Mac? Solution: The method used to access IBIC on a Mac computer will depend on what OS you are using. URL: http://digital.ni.com/public.nsf/allkb/1F4AC9A8800D687186256F4900723DD7

ENET/100: Why Does the GPIB Hardware Wizard Fail While Sequentially Verifying Interfaces? I have connected my ENET/100 by cross-over cable to my computer. When I run the GPIB Hardware Wizard, it tells me that the GPIB Sequential Interface has failed. URL: http://digital.ni.com/public.nsf/allkb/8F2B91AA3FFC7A9E86256F25007FC43D

Setting Up the GPIB-ENET/100 What step by step process can I follow to set up and verify communication with my GPIB-ENET/100? URL: http://digital.ni.com/public.nsf/allkb/0AB7B2327671DB2C86256F23005BAEA4

配置GPIB-ENET/100设备 这一步将打开NI Ethernet Device Configuration Utility（NI以太网设备配置向导）.在列表中选择GPIB-ENET/100并点击Select. 或者,您可以直接在"输入IP地址或机器名称" 一栏中手动输入设备的IP地址或者机器名称. URL: http://digital.ni.com/public.nsf/allkb/D36BA27FEEE796318625735C0025D92F

ENET/100やNI-488.2ドライバが使用しているTCPポートを変更できますか？ ENET/100やNI-488.2ドライバが使用しているTCPポートの変更をする方法がありますか？ URL: http://digital.ni.com/public.nsf/allkb/F3C0073804EE727386256F130056AA06

What Kind of Cabling Should I Use for PXI-823x or PCI-8232 (Gigabit Ethernet) Modules? What kind of cabling should I use for PXI-823x or PCI-8232 (Gigabit Ethernet) modules? URL: http://digital.ni.com/public.nsf/allkb/59560EE6F8485A6B86256F12005AF3E8

NI-488.2のNIイーサネットコンフィグレーションユーティリティが起動しない GPIB用のドライバ、NI-488.2バージョン2.2のNIイーサネットコンフィグレーションユーティリティを起動しようとしたところ、”サポートされていない操作を実行しました”というダイアログボックスが出て、ユーティリティが起動しません。どうしたら、NIイー URL: http://digital.ni.com/public.nsf/allkb/548DB1677E2033DA86256F0E00308088

Why is my GPIB-ENET/100 Not Accessible through the Ethernet Configuration Utility in Linux? I am unable to configure the GPIB-ENET/100 because it fails to show up in the Ethernet Configuration Utility. How can I fix this problem? URL: http://digital.ni.com/public.nsf/allkb/48BEC3CD0D4F378C86256EE1006EE0D0

Is There an ENET Driver for 64-Bit Linux? I am writing code on a 64-bit Linux machine and need to call the driver for my GPIB-ENET device. Does National Instruments provide this? URL: http://digital.ni.com/public.nsf/allkb/D4F2801E11FDCA2286256ED9004B4599