Different Types of Isolation: Channel-to-Channel, Bank (Channel-to-Bus), and Channel-to-Earth Ground Isolation
What are the differences between the types of electrical isolation NI offers on devices? I do not understand the differences between channel-to-channel, bank (channel-to-bus), and channel-to-earth ground isolation.
URL: http://digital.ni.com/public.nsf/allkb/CF71091043A6193B862573D70077138B
|
Configuring the NI MES-3980 IP Address and Accessing the Web Console
I need to configure the NI MES-3980 for a static or dynamic IP address and then access the web browser to configure settings. How can I get this accomplished?
URL: http://digital.ni.com/public.nsf/allkb/5983CCB59977B3DC862573D0006156D6
|
Lost UDP Packets at Fast Transfer Rates
When the UDP packets come in at high data rates (greater then 2Mb/s), they start getting lost, especially when the CPU gets loaded by other tasks.
URL: http://digital.ni.com/public.nsf/allkb/D5AC7E8AE545322D8625730100604F2D
|
在高传输速率下丢失UDP包
当UDP包以很高的数据速度（大于2Mb/s）传入时,数据包开始丢失，尤其当CPU还需要处理其他的任务时。
URL: http://digital.ni.com/public.nsf/allkb/CF55377B462913968625736F003DC80E
|
什么是以太网交路线（Ethernet crossover cable）？
当我使用NI的以太网硬件时，我被告知我必须使用以太网交路线。那什么是以太网交路线呢？
URL: http://digital.ni.com/public.nsf/allkb/BEDFDAE7C80842B348257258002C54F3
|
PXI-823x或PCI-8232(千兆以太网)模块应该使用哪种线缆？
NI Home This Document is not yet Rated Rate this Document PXI-823x或PCI-8232(千兆以太网)模块应该使用哪种线缆？ 硬件: GPIB>>Plug-in Controllers>>PCI-8232, GPIB>>Plug-in Controllers>>PXI-8232, Instrument Connectivity Other>>Ethernet>>PXI-8231, GPIB>>Plug-in Controllers>>PCI-8232, GPIB>>Plug-in Controllers>>PXI-8232,
URL: http://digital.ni.com/public.nsf/allkb/004EFF3B9DC8187C48257227000A4F52
|
在LabVIEW中如何同时控制在同一总线上的多个GPIB设备
我想在同一总线上同时对两个不同的GPIB设备进行测试，在LabVIEW中实现有什么好方法？
URL: http://digital.ni.com/public.nsf/allkb/72AA5BB8B60F3BC4482571EF00434F1F
|
Acquiring an IP Address for a GPIB-ENET
Ideally, you should ask your network administrator to provide you with an IP address for your GPIB-ENET. The alternative is to assign one yourself, which could cause conflicts if you use an IP address that is already claimed by another resource on the network.
URL: http://digital.ni.com/public.nsf/allkb/C638CFA25D45D954862571E90070E3ED
|
Assigning an IP Address to a GPIB-ENET under Windows NT/2000
If the Ready light is steady, then your GPIB-ENET is now ready for use. If the Ready light is not steady after 10 seconds, then repeat steps 2 through 6.
URL: http://digital.ni.com/public.nsf/allkb/AA83FDA112499674862571E9006868D9
|
GPIB-ENET Installation and Configuration under Windows NT
You are now ready to connect instruments to the GPIB-ENET and communicate with them. See the Introduction to the Interactive Control (IBIC) page for more information.
URL: http://digital.ni.com/public.nsf/allkb/835DA82E6E5E0671862571E90067929C
|
